PCK111BD-F NXP Semiconductors, PCK111BD-F Datasheet - Page 9

• Manufacturer Part Number: PCK111BD-F
• Description: Clock Drivers & Distribution LO VOLT 1:1 DIFF PECL CLK DR
• Manufacturer: NXP Semiconductors
• Type: Clock Driverr

Specifications of PCK111BD-F

• Number Of Clock Inputs: 2
• Output Logic Level: ECL/PECL
• Mode Of Operation: Differential
• Output Frequency: 1500MHz
• Operating Supply Voltage (min): -2.25/2.25V
• Operating Supply Voltage (typ): -2.5/-3.3/2.5/3.3V
• Operating Supply Voltage (max): -3.8/3.8V
• Package Type: LQFP
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Signal Type: ECL/HSTL/PECL
• Mounting: Surface Mount
• Pin Count: 32
• Max Output Freq: 1500 MHz
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Multiply / Divide Factor: 2:1
• Supply Voltage (max): +/- 3.8 V
• Supply Voltage (min): +/- 2.25 V
• Maximum Operating Temperature: + 85 C
• Package / Case: SOT-358
• Lead Free Status / RoHS Status: Not Compliant
• Other names: PCK111BD,128

Philips Semiconductors
Data sheet status
2004 Apr 23
Philips
Semiconductors
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL
[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given
in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no
representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be
expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree
to fully indemnify Philips Semiconductors for any damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to make changes in the products—including circuits, standard cells, and/or software—described
or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated
via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys
no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent,
copyright, or mask work right infringement, unless otherwise specified.
Level
I
II
III
Contact information
Low voltage 1:10 differential
ECL/PECL/HSTL clock driver
http://www.semiconductors.philips.com.
For additional information please visit
http://www.semiconductors.philips.com.
For sales offices addresses send e-mail to:
[e-mail].
Preliminary data
Product data
Data sheet status
Objective data
[1]
Product
status
Development
Qualification
Production
[2] [3]
This data sheet contains data from the preliminary specification. Supplementary data will be published
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
Definitions
This data sheet contains data from the objective specification for product development.
Philips Semiconductors reserves the right to change the specification in any manner without notice.
order to improve the design and supply the best possible product.
This data sheet contains data from the product specification. Philips Semiconductors reserves the
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
Fax: [phone]
9
Document order number:
Koninklijke Philips Electronics N.V. 2004
All rights reserved. Printed in U.S.A.
Date of release: 04-04
PCK111
9397 750 13082
Product data