ZT8101 Intel (CPU), ZT8101 Datasheet - Page 41

• Manufacturer Part Number: ZT8101
• Manufacturer: Intel (CPU)

Specifications of ZT8101

• Lead Free Status / RoHS Status: Supplier Unconfirmed

8.5
8.6
8.6.1
Intel
®
Table 20. History Log Messages (Sheet 2 of 2)
NetStructure
Note: If you skip Step 5, the default settings are not saved in flash.
Reset Configuration to Factory Default
The switch has a menu option to reset it to factory defaults. It can also be manually reset to the
factory defaults from the serial port with the following steps:
Please wait, loading Runtime image...................... 10%
Firmware Upgrade
Upgrade Runtime through TFTP
To upgrade the switch’s firmware, you must first complete the following tasks:
Once the firmware is on the TFTP server, you can upgrade the switch from the serial, Telnet, or
Web interface. Only one TFTP upgrade session is allowed at a time. When the download has
completed and the firmware has been written to flash, the switch will automatically reboot and
execute the new runtime firmware.
Management
Management
Management
Management
Management
Spanning Tree
Spanning Tree
Spanning Tree
Spanning Tree
Security
1. From the serial interface, reboot switch and wait for the following message to appear:
2. When the above message appears, press the # key.
3. When the “Factory Default Enable” message appears, release the # key.
4. Press the Enter key twice to log in to the system.
5. Reboot the switch with the Save Configuration and Reboot' option.
6. Wait for the switch to boot up.
7. Log in to the system with default username and password.
•
•
TM
You must obtain an updated runtime version of the firmware.
You must copy the firmware to a known directory on a TFTP server.
ZT 8101 10/100 Ethernet Switch Technical Product Specification
Configuration saved to flash (Username: Edward)
Firmware upgrade was successful (Username: Edward)
Firmware upgrade was unsuccessful! (Username: Edward)
Configuration download was successful (Username: Edward)
Configuration download was unsuccessful! (Username: Edward)
Topology change
New root
Spanning Tree Protocol is enabled
Spanning Tree Protocol is disabled
Possible spoofing attack from 00-80-C8-11-22-33 port 1
Miscellaneous Switch Features
41