PLRXPL-VC-S43-23-N JDS UNIPHASE, PLRXPL-VC-S43-23-N Datasheet - Page 11

• Manufacturer Part Number: PLRXPL-VC-S43-23-N
• Manufacturer: JDS UNIPHASE

Specifications of PLRXPL-VC-S43-23-N

• Number Of Receivers: 1
• Protocols Supported: IEEE 802.3
• Operating Supply Voltage (typ): 3.3V
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (max): 3.47V
• Operating Supply Voltage (min): 3.14V
• Pin Count: 20
• Operating Temperature (max): 70C
• Operating Temperature (min): 0C
• Lead Free Status / RoHS Status: Supplier Unconfirmed

3.6
Data Rate / Standard
10.3 GBd
11
Link Length
Fiber Type
62.5/125 µm MMF
50/125 µm MMF
50/125 µm MMF
50/125 µm MMF
50/125 µm MMF
Specification Notes
1. UI (unit interval): one UI is equal to one bit period. For example, 10.3125 Gbps
2. For LOSA and LOSD definitions, see Loss of Signal Assert/Deassert Level in Op-
3. Transmitter dispersion penalty is measured using the methods specified in the
4. Measured with stressed eye pattern as per IEEE standard 802.3-2005, Clause 52 ex-
5. Distances, shown in the “Link Length” table, are calculated for worst-case fiber
6. The maximum transmitter output power is the lesser of the Class 1 laser eye
7. Sensitivity is for informational purposes only.
8. The data pattern for the total jitter measurement is one of IEEE 802.3 Clause
9. 99% jitter is as defined in SFF-8431 Revision 3.2. 99% jitter has the same defini-
corresponds to a UI of 96.97 ps.
tical Characteristics.
IEEE standard 802.3-2005 Clause 52 except that the transversal filter differential
delay is 33 ps.
cept that the vertical eye opening penalty is as specified in Optical Characteristics.
and transceiver characteristics based on the optical and electrical specifications
shown in this document using techniques specified in IEEE 802.3. In the nomi-
nal case, longer distances are achievable.
safety limit and -1 dBm (the maximum receiver input power limit per the IEEE
802.3 Clause 52 specification).
52.9 Pattern 1, Pattern 3, or valid 64/66B data traffic.
tion as “all but 1% for jitter” as used in IEEE 802.3 Clause 52.9.9 and is defined
as the time from the 0.5th to the 99.5th percentile of the jitter histogram.
Modal Bandwidth at 850 nm (MHz*km)
200
500
900
1500
2000
10 G SFP+ 850 NM LIMITING TRANSCEIVER,
10 GIGABIT ETHERNET COMPATIBLE
Distance Range (m)
0.5 – 20
0.5 – 50
0.5 – 90
0.5 – 160
0.5 – 200
Notes
5
5
5
5
5