PIC18LF26J53-I/SP Microchip Technology, PIC18LF26J53-I/SP Datasheet - Page 250

• Manufacturer Part Number: PIC18LF26J53-I/SP
• Description: 28-pin, USB, 64KB Flash, 4KB RAM, 12 MIPS, 12-bit ADC 28 SPDIP .300in TUBE
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF26J53-I/SP

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Program Memory Size: 64KB (32K x 16)
• Program Memory Type: FLASH
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 2.75 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC18F47J53 FAMILY
17.2.2
As mentioned earlier, the RTCC module is intended to
be clocked by an external Real-Time Clock (RTC)
crystal oscillating at 32.768 kHz, but can also be
clocked by the INTRC. The RTCC clock selection is
decided by the RTCOSC bit (CONFIG3L<1>).
FIGURE 17-4:
17.2.2.1
The RTCC module can be clocked by an external,
32.768 kHz crystal (Timer1 oscillator or T1CKI input) or
the INTRC oscillator, which can be selected in
CONFIG3L<1>.
If the Timer1 oscillator will be used as the clock source
for the RTCC, make sure to enable it by setting
T1CON<3> (T1OSCEN). The selected RTC clock can
be
RTSECSEL<1:0> bits in the PADCFG register.
17.2.3
This section explains which timer values are affected
when there is a rollover.
• Time of Day: From 23:59:59 to 00:00:00 with a
• Month: From 12/31 to 01/01 with a carry to the
• Day of Week: From 6 to 0 with no carry (see
• Year Carry: From 99 to 00; this also surpasses the
DS39964B-page 250
32.768 kHz XTAL
from T1OSC
Internal RC
CONFIG 3L<1>
carry to the Day field
Year field
Table 17-1)
use of the RTCC
Note 1:
brought
CLOCK SOURCE
DIGIT CARRY RULES
Writing to the lower half of the MINSEC register resets all counters, allowing fraction of a second synchronization.
The clock prescaler is held in Reset when RTCEN = 0.
Real-Time Clock Enable
out
to
CLOCK SOURCE MULTIPLEXING
Second
the
RTCC
pin
Clock Prescaler
Hour:Minute
1:16384
by
Preliminary
the
(1)
Day of Week
module to yield an error of 3 seconds or less per month.
Calibration of the crystal can be done through this
(For further details, see Section 17.2.9 “Calibration”.)
For the day to month rollover schedule, see Table 17-2.
Considering that the following values are in BCD
format, the carry to the upper BCD digit will occur at a
count of 10 and not at 16 (SECONDS, MINUTES,
HOURS, WEEKDAY, DAYS and MONTHS).
TABLE 17-1:
Half-Second
Clock
Day
Wednesday
Thursday
Saturday
Tuesday
Monday
Sunday
Friday
Half Second
DAY OF WEEK SCHEDULE
Day of Week
Month
 2010 Microchip Technology Inc.
(1)
One-Second Clock
0
1
2
3
4
5
6
Year