28S2023-0M0 Laird Technologies, 28S2023-0M0 Datasheet - Page 19

• Manufacturer Part Number: 28S2023-0M0
• Description: FERRITE SPLIT FILTER 20POS METAL
• Manufacturer: Laird Technologies
• Series: Stewardr
• Type: Core-Splitr

Specifications of 28S2023-0M0

• Filter Type: Flat Cable, Snap On
• Shape: Rectangular
• Frequency: 100MHz
• Impedance: 250 Ohm
• Package / Case: 38.10mm x 6.35mm, Slot 26.67mm x 0.84mm
• Shielding: Unshielded
• Test Frequency: 100 MHz
• Product: Data Line EMI/RFI Filters
• Maximum Dc Resistance: 250 Ohms
• Operating Temperature Range: - 40 C to + 125 C
• Termination Style: Axial
• Impedance, At 100 Mhz: 250 Ohms
• Impedance, At 25 Mhz: 115 Ohms
• Impedance, At 300 Mhz: 520 Ohms
• Material, Core: 28
• Special Features: Flex Cable
• Termination: Cable
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 10705; 240-2104; RC2023M

Plastic Clip Assemblies: To specify one core side and one white plastic clip together, replace the second ferrite core part number character
after the dash with the letter “P” (example: 28S2022-0P0). One complete assembly of two ferrite core sides (28 material) with two plastic clips
would be specified as follows:
2 of part # 28S2022-0P0.
Metal Clip Assemblies: To specify one core side and one metal clip together, replace the second ferrite core part number character after the
dash with the letter “M” (example: 28S2022-0M0). One complete assembly of two ferrite cores (28 material) with two metal clips would be
specified as follows:
2 of part # 28S2022-0M0
Clips for Bulk Shipment: To order white plastic end clips (with attachment ears) separately in bulk, specify part number ASSE001-2. To order metal
end clips separately in bulk, specify part number ASSE017-2. No standard clips are available for 28S2827-210.
E
dimension by 2. Both the “D” and “E” dimensions must be doubled for assembled core dimensions.
Split Core with white Plastic Clips
** To determine total inside slot gap (I.D.) of an assembled split ferrite ribbon core, multiply the “E”
Split ferrite cores for flat / ribbon cables are sold as single sides. It is necessary to order
two sides to form one set. [Except 28S2001-2A2 (Figure 3) which is sold assembled]
B
A
Split Ferrite Cores for Ribbon & Flex Cables
Attachment ears are standard.
Figure 1
Part #28S2001-2A2 split ferrite core assembly with hinged black plastic case
visit
www.lairdtech.com
E
D
B
C
for product additions and more product details
Figure 
E
A
C
D
A
B
Split Core with Metal Clips
Figure 
D
C
19