SST89E58RD2-40-I-TQJE Microchip Technology, SST89E58RD2-40-I-TQJE Datasheet - Page 55

• Manufacturer Part Number: SST89E58RD2-40-I-TQJE
• Description: 4.5 To 5.5V FlashFlex 8-bit 8051 Microcontroller 44 TQFP 10x10x1mm TRAY
• Manufacturer: Microchip Technology
• Series: FlashFlex®r

Specifications of SST89E58RD2-40-I-TQJE

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: EBI/EMI, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 36
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 8K x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP
• Processor Series: FlashFlex51
• Core: C51
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 3
• Operating Supply Voltage: 4.5 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Converters: -
• Lead Free Status / Rohs Status: Details

FlashFlex MCU
SST89E54RD2A/RDA / SST89E58RD2A/RDA
8.3.4 Pulse Width Modulator
The Pulse Width Modulator (PWM) mode is used to gener-
ate 8-bit PWMs by comparing the low byte of the PCA
timer (CL) with the low byte of the compare register
(CCAPnL). When CL < CCAPnL the output is low. When
CL ≥ CCAPnL the output is high. To activate this mode, the
user must set the PWM and ECOM bits in the module’s
CCAPMn SFR. (See Figure 8-5 and Table 8-7)
In PWM mode, the frequency of the output depends on the
source for the PCA timer. Since there is only one set of CH
and CL registers, all modules share the PCA timer and fre-
quency. Duty cycle of the output is controlled by the value
TABLE
©2008 Silicon Storage Technology, Inc.
PCA Timer Mode
1/12 Oscillator Frequency
1/4 Oscillator Frequency
Timer 0 Overflow:
External Input (Max)
FIGURE
8-bit
16-bit
8-bit Auto-Reload
8-7: Pulse Width Modulator Frequencies
8-5: PCA Pulse Width Modulator Mode
ECOMn CAPPn CAPNn MATn
Enable
Overflow
0
PCA Timer/Counter
0
8-bit Comparator
CCAPnH
CCAPnL
CL
0
TOGn
3.9 KHz to 15.3 Hz
0
11.8 KHz
12 MHz
3.9 KHz
15.5 Hz
0.06 Hz
5.9 KHz
55
PWMn ECCFn
loaded into the high byte (CCAPnH). Since writes to the
CCAPnH register are asynchronous, a new value written to
the high byte will not be shifted into CCAPnL for compari-
son until the next period of the output (when CL rolls over
from 255 to 00).
To calculate values for CCAPnH for any duty cycle, use
the following equation:
where CCAPnH is an 8-bit integer and Duty Cycle is a
fraction.
CL < CCAPnL
CL >= CCAPnL
0
PWM Frequency
CCAPnH = 256(1 - Duty Cycle)
CCAPMn
n=0 to 4
0
1
5.2 KHz to 20.3 Hz
15.6 KHz
5.2 KHz
7.8 KHz
16 MHz
20.3 Hz
0.08 Hz
1339 F27.0
CEXn
S71339-02-000
Data Sheet
T8-7.0 1339
02/08