5962-8950304CA Intersil, 5962-8950304CA Datasheet - Page 14

• Manufacturer Part Number: 5962-8950304CA
• Manufacturer: Intersil

Specifications of 5962-8950304CA

• Lead Free Status / RoHS Status: Not Compliant

DSCC FORM 2234
APR 97
appendix A.
prior to quality conformance inspection. The following additional criteria shall apply:
MIL-STD-883 including groups A, B, C, and D inspections. The following additional criteria shall apply.
4. VERIFICATION
4.1 Sampling and inspection. Sampling and inspection procedures shall be in accordance with MIL-PRF-38535,
4.2 Screening. Screening shall be in accordance with method 5004 of MIL-STD-883, and shall be conducted on all devices
4.3 Quality conformance inspection. Quality conformance inspection shall be in accordance with method 5005 of
4.3.1 Group A inspection.
4.3.2 Groups C and D inspections.
a. Burn-in test, method 1015 of MIL-STD-883.
b.
a.
b.
a.
b.
(1) Test condition A, B, C, or D. The test circuit shall be maintained by the manufacturer under document revision level
(2) T
(1)
(2)
(3)
Interim and final electrical test parameters shall be as specified in table II herein, except interim electrical parameter
tests prior to burn-in are optional at the discretion of the manufacturer.
Tests shall be as specified in table II herein.
Subgroups 4, 5, 6, 7, and 8 in table I, method 5005 of MIL-STD-883 shall be omitted.
End-point electrical parameters shall be as specified in table II herein.
Steady-state life test conditions, method 1005 of MIL-STD-883.
control and shall be made available to the preparing or acquiring activity upon request. The test circuit shall specify
the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in method
1015 of MIL-STD-883.
A
MICROCIRCUIT DRAWING
Test condition A, B, C, or D. The test circuit shall be maintained by the manufacturer under document revision
level control and shall be made available to the preparing or acquiring activity upon request. The test circuit shall
specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in
method 1005 of MIL-STD-883.
T
Test duration: 1,000 hours, except as permitted by method 1005 of MIL-STD-883.
COLUMBUS, OHIO 43218-3990
= +125C, minimum.
A
DLA LAND AND MARITIME
= +125C, minimum.
STANDARD
SIZE
A
REVISION LEVEL
J
SHEET
5962-89503
14