SCD55102A OSRAM Opto Semiconductors Inc, SCD55102A Datasheet - Page 10

• Manufacturer Part Number: SCD55102A
• Description: LED Displays 5x5 Super Red 0.145 , 10-CHARACTER
• Manufacturer: OSRAM Opto Semiconductors Inc
• Series: Intelligent Display®r

Specifications of SCD55102A

• Display Type: Dot Matrix
• Emitting Color: Hi-Eff. Red
• Number Of Digits: 10
• Digit Size (in): .145in
• Viewing Area Height (mm): 3.68mm
• Viewing Area Length (mm): 2.03mm
• Package Type: Panel
• Operating Supply Voltage (min): 4.5V
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (max): 5.5V
• Operating Temperature Classification: Industrial
• Operating Temp Range: -40C to 85C
• Mounting: Through Hole
• Pin Count: 10
• Total Thickness (mm): 5.08mm
• Opto Display Type: Panel
• Pattern Type: Dot Matrix
• Millicandela Rating: 237µcd
• Size / Dimension: 1.50" L x 0.39" W x 0.20" H (38.10mm x 10.00mm x 5.08mm)
• Color: Red
• Configuration: 5 x 5
• Character Size: 0.145 in
• Illumination Color: High Efficiency Red
• Wavelength: 630 nm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Luminous Intensity: 237 ucd
• Viewing Area (w X H): 2.03 mm x 3.68 mm
• Lead Free Status / RoHS Status: Compliant
• Voltage - Forward (vf) Typ: -
• Internal Connection: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q68100A0990

Row Strobing
Multiplexer and Display Driver
The ten characters are row multiplexed with RAM resident column
data. The strobe rate is established by the internal or external
MUX Clock rate. The MUX Clock frequency is divided by a 320
counter chain. This results in a typical strobe rate of 750 Hz. By
pulling the Clock SEL line low, the display can be operated from an
external MUX Clock. The external clock is attached to the CLK I/O
connection (pin 15). The maximum external MUX Clock frequency
should be limited to 1.0 MHz.
An asynchronous hardware Reset (pin 13) is also provided. Bring-
ing this pin low will clear the Character Address Register, Control
Word Register, RAM, and blanks the display. This action leaves the
display set at Character Address 0, and the Brightness Level set at
100%.
Electrical & Mechanical Considerations
Interconnect Considerations
Optimum product performance can be had when the following
electrical and mechanical recommendations are adopted. The
SCD5510XA’s IC is constructed in a high speed CMOS process,
consequently high speed noise on the SERIAL DATA, SERIAL
DATA CLOCK, LOAD and RESET lines may cause incorrect data
to be written into the serial shift register. Adhere to transmission
line termination procedures when using fast line drivers and long
cables (>10 cm).
Good digital grounds (pins 14, 28) and power supply decoupling
(pins 6, 9, 20, 23) will insure that I
currents do not generate localized ground bounce. Therefore it is
recommended that each display package use a 0.1 µF and 20 µF
capacitor between V
When the internal MUX Clock is being used connect the CLKSEL
pin to V
nected to the system’s reset control, it is recommended that this
pin be connected to the center node of a series 0.1 µF and 100 kΩ
RC network. Thus upon initial power up the RESET will be held
low for 10 ms allowing adequate time for the system power supply
to stabilize.
The SCD5510XA allows up to 1.7 W of power dissipation at 70°
and 1.29 W power dissipation at a maximum operating tempera-
ture of 85°C. Approximately 60% of this power is dissipated by the
IC to the PC board via the V
mum thermal reliability is obtained by connecting all of the V
pins to a common pad located on both sides of the PC board. This
technique offers a low thermal resistance for IC to system ambi-
ent.
2008-07-22
CC
. In those applications where RESET will not be con-
Row
Load
Row 0
Row 1
Row 2
Row 3
Row 4
CC
SCD55100A, SCD55101A, SCD55102A, SCD55103A, SCD55104A
and ground.
0 1 2 3 4
Load Row 0
Columns
CC
connection (pins 6, 9, 20, 23). Opti-
CC
(<400 mA peak) switching
Row 0
Row 1
Row 2
Row 3
Row 4
0
Load Row 1
Columns
1
2 3
4
CC
Row 0
Row 1
Row 2
Row 3
Row 4
10
0
Load Row 2
Columns
ESD Protection
The input protection structure of the SCD55100A/1A/2A/3A/4A
provides significant protection against ESD damage. It is capable
of withstanding discharges greater than 2.0 kV. Take all the stan-
dard precautions, normal for CMOS components. These include
properly grounding personnel, tools, tables, and transport carriers
that come in contact with unshielded parts. If these conditions are
not, or cannot be met, keep the leads of the device shorted
together or the parts in anti-static packaging.
Soldering Considerations
The SCD55100A/1A/2A/3A/4A can be hand soldered with SN63
solder using a grounded iron set to 260°C.
Wave soldering is also possible following these conditions: Pre-
heat that does not exceed 93°C on the solder side of the PC board
or a package surface temperature of 85°C. Water soluble organic
acid flux (except carboxylic acid) or rosin-based RMA flux without
alcohol can be used.
Wave temperature of 245°C ± 5°C with a dwell between 1.5 sec. to
3.0 sec. Exposure to the wave should not exceed temperatures
above 260°C for five seconds at 1.59 mm (0.063") below the seat-
ing plane. The packages should not be immersed in the wave.
Post Solder Cleaning Procedures
The least offensive cleaning solution is hot D.I. water (60 °C) for
less than 15 minutes. Addition of mild saponifiers is acceptable. Do
not use commercial dishwasher detergents.
For faster cleaning, solvents may be used. Exercise care in choos-
ing solvents as some may chemically attack the nylon package.
Maximum exposure should not exceed two minutes at elevated tem-
peratures. Acceptable solvents are TF (trichlorotrifluorethane), TA,
111 Trichloroethane, and unheated acetone.
Note:
1)
Genesolv,
Unacceptable solvents contain alcohol, methanol, methylene
chloride, ethanol, TP35, TCM, TMC, TMS+, TE, or TES. Since
many commercial mixtures exist, contact a solvent vendor for
chemical composition information. Some major solvent manufac-
turers are: Allied Chemical Corporation, Specialty Chemical Divi-
sion, Morristown, NJ; Baron-Blakeslee, Chicago, IL; Dow
Chemical, Midland, MI; E.I. DuPont de Nemours & Co., Wilming-
ton, DE.
1
2
Acceptable commercial solvents are: Basic TF, Arklone, P.
D. Genesolv DA, Blaco-Tron TF and Blaco-Tron TA.
3
4
Row 0
Row 1
Row 2
Row 3
Row 4
0
Load Row 3
Columns
1
2
3 4
Row 0
Row 1
Row 2
Row 3
Row 4
0 1 2
Load Row 4
Columns
(1)
IDXX5188
3
4