TOTX176 Toshiba, TOTX176 Datasheet - Page 4

• Manufacturer Part Number: TOTX176
• Manufacturer: Toshiba

Specifications of TOTX176

• Optical Fiber Type: TX
• Data Transfer Rate: 6Mbps
• Operating Temperature Classification: Commercial
• Peak Wavelength: 660nm
• Operating Supply Voltage (min): 4.75V
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (max): 5.25V
• Operating Temp Range: -20C to 70C
• Mounting: Panel
• Pin Count: 6
• Lead Free Status / RoHS Status: Not Compliant

(6)
(7)
(8)
(9)
(10) Input voltage
(11) Soldering condition
(12) Precaution on waste
(13) Precaution on use
Solvent
Protective cap
Supply voltage
Panel attachment
TOTX176 provides hole for panel attachment. Please be sure to attach it to panel.
When using solvent for flux removal, do not use a high acid or high alkali solvent. Be careful not to
pour solvent in the optical connector ports. If solvent is inadvertently poured there, clean with cotton
tips.
When the fiber optic transmitting module TOTX176 is not in use, use the protective cap.
Use the supply voltage within the Typ. operating condition (V
voltage does not exceed the maximum rating value of 7 V, even instantaneously.
If a voltage exceeding the maximum rating value (V
the internal IC may degrade causing some damage. If excessive voltage due to surges may be added to
the input, insert a protective circuit.
Solder at 260°C or less within ten seconds.
When discarding devices and packing materials, follow procedures stipulated by local regulations in
order to protect the environment against contamination.
Compound semiconductors such as GaAs are used as LED materials for this module. When discarding
waste or at final processing, attention must be paid to workers and the environment.
Toshiba is continually working to improve the quality and the reliability of its products. Nevertheless,
semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity
and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing Toshiba
products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a
Toshiba product could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that Toshiba products are used within specified operating
ranges as set forth in the most recent product specifications. Also, please keep in mind the
precautions and conditions set forth in the Toshiba Semiconductor Reliability Handbook.
4
CC
+ 0.5 V) is applied to the transmitter input,
CC
= 5 ± 0.25 V). Make sure that supply
2001-07-26
TOTX176