E82802AB8 S B48 Intel, E82802AB8 S B48 Datasheet - Page 26
![no-image](/images/manufacturer_photos/0/3/336/intel_sml.jpg)
E82802AB8 S B48
Manufacturer Part Number
E82802AB8 S B48
Description
Manufacturer
Intel
Datasheet
1.E82802AB8_S_B48.pdf
(53 pages)
Specifications of E82802AB8 S B48
Lead Free Status / RoHS Status
Not Compliant
Intel
4.9.2.
4.9.2.1.
26
®
82802AB/AC Firmware Hub
General-Purpose Input Register
GPI_REG — General-Purpose Input Register
Write Lock
The default write status of all blocks upon power-up is write-locked. Any program or erase operations
attempted on a locked block will return an error in the status register (indicating block lock). The status
of the locked block can be changed to unlocked by clearing the write-lock bit, provided the lock-down
bit also is not set. The current write-lock status of a particular block can be determined by reading the
corresponding write-lock bit. The write-lock functions in conjunction with the hardware write-lock pins,
TBL# and WP#. When active, these pins take precedence over the register locking function and write-
lock the top block or remaining blocks, respectively. Reading this register will not read the state of the
TBL# or WP# pin.
Read Lock
The default read status of all blocks upon power-up is read-unlocked. When a block’s read-lock bit is set,
data cannot be read from that block. An attempted read from a read-locked block will result in the data
00h. (Note that failure is not reflected in the status register.) The read-lock status can be unlocked by
clearing the read-lock bit, provided the lock-down bit has not been set. The current read-lock status of a
particular block can be determined by reading the corresponding read-lock bit.
Lock-Down
In the Intel FWH interface mode, the default lock-down status of all blocks upon power-up is not-locked-
down. The lock-down bit for any block may be set, but only once, because future attempts to change that
block-locking register will be ignored. The lock-down bit is cleared only upon a device reset with RST#
or INIT#. The current lock-down status of a particular block can be determined by reading the
corresponding lock-down bit. Once a block’s lock-down bit is set, the read- and write-lock bits for that
block can no longer be modified, and the block is locked-down in its current state of read and write
accessibility.
This register reads the status of the FGPI [4:0] pins on the Intel FWH. Since this is a pass-through
register, there is no default value, only the state of the pins at power-up.
Memory Address:
Default Value:
Access:
Size:
7:5
Bit
4
3
2
1
0
Reserved
FGPI[4]. Reads status of general-purpose input pin (PLCC-30/TSOP-7).
FGPI[3]. Reads status of general-purpose input pin (PLCC-3/TSOP-15).
FGPI[2]. Reads status of general-purpose input pin (PLCC-4/TSOP-16).
FGPI[1]. Reads status of general-purpose input pin (PLCC-5/TSOP-17).
FGPI[0]. Reads status of general-purpose input pin (PLCC-6/TSOP-18).
FFBC0100h
N/A
R0
8 bits
Function
Datasheet
R