M38510/01205BEA E2V, M38510/01205BEA Datasheet - Page 3

• Manufacturer Part Number: M38510/01205BEA
• Manufacturer: E2V

Specifications of M38510/01205BEA

• Lead Free Status / RoHS Status: Supplier Unconfirmed

section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
specification to the extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
http://assist.daps.dla.mil
Philadelphia, PA 19111-5094.)
herein the text of this document shall takes precedence. Nothing in this document, however, supersedes applicable
laws and regulations unless a specific exemption has been obtained.
manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturers list before
contract award (see 4.3 and 6.4).
specified herein or as modified in the device manufacturer's Quality Management (QM) plan. The modification in the
QM plan shall not affect the form, fit, or function as described herein.
specified in MIL-PRF-38535 and herein.
on figure 1.
the qualifying activity and the preparing activity upon request.
and apply over the full recommended case operating temperature range, unless otherwise specified.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications and standards form a part of this
DEPARTMENT OF DEFENSE SPECIFICATIONS
DEPARTMENT OF DEFENSE STANDARDS
2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited
3. REQUIREMENTS
3.1 Qualification. Microcircuits furnished under this specification shall be products that are manufactured by a
3.2 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535 and as
3.3 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as
3.3.1 Logic diagrams and terminal connections. The logic diagram and terminal connections shall be as specified
3.3.2 Truth tables. The truth tables shall be as specified on figure 2.
3.3.3 Schematic circuits. The schematic circuits shall be maintained by the manufacturer and made available to
3.3.4 Case outlines. The case outlines shall be as specified in 1.2.3.
3.4 Lead material and finish. The lead material and finish shall be in accordance with MIL-PRF-38535 (see 6.6).
3.5 Electrical performance characteristics. The electrical performance characteristics are as specified in table I,
(Copies of these documents are available online at
MIL-PRF-38535
MIL-STD-883
MIL-STD-1835
- Test Method Standard for Microelectronics.
- Interface Standard Electronic Component Case Outlines.
- Integrated Circuits (Microcircuits) Manufacturing, General Specification for.
or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
http://assist.daps.dla.mil/quicksearch/
3
or