SR1530HCLR Intel (CPU), SR1530HCLR Datasheet - Page 23

• Manufacturer Part Number: SR1530HCLR
• Manufacturer: Intel (CPU)

Specifications of SR1530HCLR

• Lead Free Status / RoHS Status: Not Compliant

Intel
3.2.2.1
The embedded Intel
Level 0) and data mirroring (RAID Level 1). For higher performance, data stripping alleviates
disk bottlenecks by taking advantage of the dual independent DMA engines that each SATA
port offers.
Data mirroring is for data security. If a disk fails, a mirrored copied of the failed disk is brought
on-line. There is no loss of either PCI resources (request/grant pair) or add-in card slots.
Intel
Intel
3.2.3
The integrated IDE controller of the 6321ESB ICH6 provides one IDE channel. It redefines
signals on the IDE cable to allow both host and target throttling of data and transfer rates of up
to 100 MB/s. The IDE channel provides optical drive support. The BIOS initializes and supports
ATAPI devices such as LS-120/240, CD-ROM, CD-RW and DVD-ROM. The IDE channel is
accessed through a high-density 40-pin connector ((J2K5) that provides I/O signals. The ATA
channel can be configured and enabled or disabled through the BIOS Setup Utility.
3.2.4
The USB controller functionality integrated into the 6321ESB provides the interface for up to
four USB 2.0 ports. Two external connectors are located on the back edge of the server board
and one internal 2x5 header supports two optional USB 2.0 ports.
3.3
An ATI* ES1000 PCI graphics accelerator with 16 MB of video DDR SDRAM and support
circuitry for an embedded SVGA video sub-system is provided. The ATI ES1000 chip contains
an SVGA video controller, clock generator, 2D engine, and RAMDAC in a 359-pin BGA. One
4M x 16 x 4 bank DDR SDRAM chip provides 16 MB of video memory.
The SVGA sub-system supports modes up to 1024 x 768 resolution in 8 / 16 / 32 bpp modes
under 2D. It also supports both CRT and LCD monitors up to a 100 Hz vertical refresh rate.
Video is accessed using a standard 15-pin VGA connector found on the back edge of the server
board. Video signals are also made available through the 120-pin bridge-board connector that
provides signals for an optional video connector on the control panel. Video is routed to both the
Revision 2.2
•
•
®
®
®
Server Board S5000VCL TPS
Embedded Server RAID Technology functionality requires these items:
Embedded Server RAID Technology is not available in these configurations:
At least two SATA hard disk drives
Intel
Video Support
®
15. Intel
16. Intel
17. Intel
18. The SATA controller in compatible mode
Embedded Server RAID Technology has been disabled
Intel
Parallel ATA (PATA) Support
USB 2.0 Support
®
®
®
®
®
Embedded Server RAID Technology Support
6321ESB I/O Controller Hub
Embedded Server RAID Technology Option ROM
Application Accelerator RAID edition drivers, most recent revision
Embedded Server RAID Technology solution offers data stripping (RAID
Intel order number: D64569-006
Functional Architecture
13