Z4S264C STEC, Z4S264C Datasheet - Page 42
![no-image](/images/no-image-200.jpg)
Z4S264C
Manufacturer Part Number
Z4S264C
Description
Manufacturer
STEC
Type
Solid State Driver
Datasheet
1.Z4S264C.pdf
(96 pages)
Specifications of Z4S264C
Density
64GByte
Operating Supply Voltage (typ)
5V
Operating Temperature (min)
0C
Operating Temperature (max)
70C
Package Type
Not Required
Mounting
Screw
Operating Temperature Classification
Commercial
Operating Supply Voltage (min)
4.75V
Operating Supply Voltage (max)
5.25V
Programmable
Yes
Lead Free Status / RoHS Status
Not Compliant
Format Track (50h)
This command writes the desired head and cylinder of the selected drive with a vendor-unique data
pattern (typically 00h or FFh). The drive accepts a sector buffer of data from the host to follow the
command with the same protocol as the Write Sector(s) - 30h command, although the information in
the cache is not used.
Identify Response (ECh)
This command allows the host to receive parameter information from the drive.
Idle (97h, E3h)
This command will cause the drive to set BSY, enter the IDLE mode, clear BSY, and generate an
interrupt. If the sector count is zero, the automatic power down mode is disabled.
Idle Immediate (95h, E1h)
This command will cause the drive to set BSY, enter the IDLE (READ) mode, clear BSY, and
generate an interrupt.
Initialize Drive Parameters (91h)
This command will enable the host to set the number of sectors per track and the number of heads
per cylinder.
NOP (00h)
This command is mandatory for devices that implement the PACKET and TCQ feature sets. The
device will respond with command aborted. For devices that implement the TCQ feature set, the
subcommand 00h in the Feature field shall abort any outstanding queue. Subcommand codes 01h
through FFh in the Feature field shall not affect the status of any outstanding queue.
Read Buffer (E4h)
This command is optional for devices that do not implement the PACKET feature set. The command
will enable the host to read a 512-byte block of data. The Write Buffer (E8h) command should
precede the Read Buffer (E4h) command, lest the data returned be indeterminate.
Read DMA (C8h)
This command is mandatory for devices that do not implement the PACKET feature set. The
command will allow the host to read data using the DMA data transfer protocol.
Read DMA Ext (25h)
This command is mandatory for devices that implement the 48-bit Address feature set. The command
will allow the host to read data using the DMA data transfer protocol.
24
Zeus 2.5-Inch Serial ATA Solid State Drive