171662-1 TE Connectivity, 171662-1 Datasheet - Page 11

• Manufacturer Part Number: 171662-1
• Description: E-J MK-2 070 REC CONT
• Manufacturer: TE Connectivity
• Type: Contactr
• Series: 070r

Specifications of 171662-1

• Gender: RCP
• Body Orientation: Straight
• Housing Material: Not Required
• Number Of Contacts: 1POS
• Number Of Ports: 1Port
• Number Of Terminals: 1
• Pitch (mm): Not Requiredmm
• Contact Material: Brass
• Operating Temp Range: -30C to 105C
• Mounting Style: Cable
• Termination Method: Crimp
• Contact Plating: Pre-Tin
• Product Height (mm): 3.6mm
• Product Depth (mm): 5.4mm
• Product Length (mm): 16.5mm
• Product Line: Econoseal J
• Product Type: Contact
• Wire/cable Type: Discrete Wire
• Cable Type: Thin Wall
• Termination Method To Wire/cable: Crimp
• Wire/cable Size (awg): 16 – 20
• Wire/cable Size (mm²): 0.5 – 1.25
• Wire Type: Stranded
• Contact Type: Socket
• Contact Base Material: Brass
• Contact Plating, Mating Area, Material: Pre-Tin
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.76 [29.92]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 2.00 – 2.60 [0.079 – 0.102]
• Application Use: Wire-to-Wire
• Contact Transmits (typical Application): Power
• Packaging Method: Reel
• Packaging Quantity: 6000
• Lead Free Status / RoHS Status: Compliant

AMP Sealed Connectors
A
Contacts
Wire Seals and Cavity Plugs
Connector Housings
070 series tab contacts 1.8
mm [.071 in.] wide x 0.64
mm [.025 in.] thick.
Receptacle contacts are
gold plated, phosphor
bronze.
Header contacts are made
from brass, selectively plated
with tin lead and gold.
Lanceless contact design to
reduce tangling.
Wire range 0.5 - 1.25 mm
[#20 - #16 AWG].
See Note 1
Produced from silicon
rubber.
Wire seals and contacts
crimped simultaneously.
For insulation diameters
1.6 - 2.4 mm [.063 - .094 in.]
Horizontal header
configuration with sealed
receptacle housings.
Headers are made from
13% glass filled nylon.
Receptacle housings and
double lock plates are
produced from unfilled
nylon.
Available in 18 and 36
position versions.
The receptacle housing
requires a loose piece
secondary lock (sold
separately).
Cavity plugs available to
seal unused cavities.
Protected locking lever.
AMP Technical Support Center/AMP FAX Service
1-800-522-6752 717-986-7777
2
AMP Sealed Connectors
Similar in design to the
Econoseal J Series
[Mark II+] connectors, the
Econoseal III connectors
utilize 070 series contacts
for sealed wire to board
applications.
The horizontal header
includes factory loaded
contacts with gold over
nickel plating at the
separable interface and tin
lead plating at the board
end. Gaskets for sealing
around the outside of the
header are not included.
Standard 070 receptacle
contacts are used in the
plug connector. Receptacle
contacts are gold plated at
the separable interface and
tin plated in the wire crimp
area. Every plug connector
includes a factory installed
interface seal.
Each plug connector
requires a loose piece
secondary lock plate be
installed after the
receptacle contacts are
inserted into the connector
housing. The lock plate
Econoseal III ... 070 Series, Wire To Board Connectors
helps to detect partially
mated contacts, increases
contact retention, and helps
prevent contact damage
during mating or unmating
of the connector.
plates are sold
All sealed surfaces are
located inside of the
connector housing to
reduce the possibility of
damage during handling.
Note 1
2.0 mm
with thin wall insulation of
2.4 - 2.7 mm [.094 - .106
in.] can also be terminated.
Applicators for this wire size
are made to order. Call the
Tooling Assistance Center
at 1-800-722-1111 for more
Information.
Dimensions are in
millimeters over [inches]
2
[#14 AWG] wires
separately.
Lock
www.amp.com
Product Performance
Temperature Rating
100
temperature including
temperature rise due to
current load.
Current Guidelines
See page 9 of the product
specification for
information.
Product Documentation
Product Specification
108-3114
Application Specification
114-3040
0
C maximum operating
Specifications
subject to change.
Revised 01-00
Catalog
65481
11