H7CX-AWSD1 DC12-24/AC24 Omron, H7CX-AWSD1 DC12-24/AC24 Datasheet - Page 36

• Manufacturer Part Number: H7CX-AWSD1 DC12-24/AC24
• Description: COUNTER SCREW-TERM 12VDC 6DIGIT
• Manufacturer: Omron
• Series: H7CXr

Specifications of H7CX-AWSD1 DC12-24/AC24

• Count Rate: *
• Number Of Digits/alpha: 6
• Input Type: *
• Output Type: *
• Voltage - Supply: 12 V ~ 24 VDC, 24VAC
• Display Type: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: H7CX-AWSD1DC12-24/AC24; H7CXAWSD1DC1224AC24

■ Operation in Configuration Selection Mode
Select which H7CX configuration is used (i.e., 1-stage counter, 2-stage counter, total and preset counter, batch counter, dual counter, or tachom-
eter) in configuration selection mode. The H7CX is also equipped with a DIP switch monitor function, a convenient function that enables the settings
of the DIP switch pins to be confirmed using the front display.
Note: 1. When the mode is changed to configuration selection mode, the present value is reset, outputs turns OFF, and counting (measuring)
2. Setting changes made in configuration selection mode are enabled when the mode is changed to run mode. If the configuration is
stops.
changed, the set value (or set value 1 and set value 2), OUT1 set value or OUT2 set value are initialized.
(See note 2.)
Counting stopped
Counting possible
Power ON
1 s min.
+
1
(See note 1.)
Configuration
selection
DIP switch
monitor
OFF
ON
To change the mode to configuration selection mode, press
the
mode will not change if the
Select the configuration using the
models)
The H7CX is factory-set to the 1-stage counter configuration (2-stage
counter configuration with H7CX-AW@/-A4W@ models).
The configuration that can be selected depend on the model.
The status of the DIP switch pins (1 to 8) can be confirmed using the
Note: This display is possible only if DIP switch pin 1 (DIP switch
(1-stage counter) (2-stage counter)
Example
settings) is set to ON (i.e., enabled).
1
keys.
Key for 1 s min. with the
1
2
3
4
5
(Total and preset
counter)
6
1
7
key is pressed first.
8
key held down. The
1
keys. (
(Batch counter)
Indicates that DIP switch pin 8 is ON.
Indicates that DIP switch pin 7 is OFF.
Indicates that DIP switch pin 6 is ON.
Indicates that DIP switch pin 5 is OFF.
Indicates that DIP switch pin 4 is ON.
Indicates that DIP switch pin 3 is OFF.
Indicates that DIP switch pin 2 is ON.
Indicates that DIP switch pin 1 is ON.
key only for 6-digit
(Dual counter)
(Tachometer)
H7CX-A
1
36