H7CX-AWSD1 DC12-24/AC24 Omron, H7CX-AWSD1 DC12-24/AC24 Datasheet - Page 44

• Manufacturer Part Number: H7CX-AWSD1 DC12-24/AC24
• Description: COUNTER SCREW-TERM 12VDC 6DIGIT
• Manufacturer: Omron
• Series: H7CXr

Specifications of H7CX-AWSD1 DC12-24/AC24

• Count Rate: *
• Number Of Digits/alpha: 6
• Input Type: *
• Output Type: *
• Voltage - Supply: 12 V ~ 24 VDC, 24VAC
• Display Type: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: H7CX-AWSD1DC12-24/AC24; H7CXAWSD1DC1224AC24

Specifications
■ Ratings
Note: 1. Permissible ripple: 20% (p-p) max.
Classification
Rated supply voltage (See note 1.)
Operating voltage range
Power consumption
Mounting method
External connections
Display (See note 2.)
Digits
Input signals
Input method
Hold input
Pulse measurement method
Display refresh cycle
Max. counting speed
Measuring range
Measuring accuracy
Output modes
Auto-zero time
Startup time
Average processing
Control output
Output type
External power supply
Key protection
Prescaling function
Decimal point adjustment
Sensor waiting time
Memory backup
Ambient temperature
Ambient humidity
Case color
2. The display is lit only when the power is ON.
Tachometer
100 to 240 VAC (50/60 Hz)
24 VAC (50/60 Hz)/12 to 24 VDC
85% to 110% of rated supply voltage (90% to 110% at 12 VDC)
Approx. 9.4 VA at 264 VAC
Approx. 7.1 VA at 26.4 VAC
Approx. 4.7 W at 12 VDC
Flush mounting, surface mounting, or DIN track mounting
11-pin socket
7-segment, negative transmissive LCD;
Present value: 9-mm-high characters, red
Comparison value: 6-mm-high characters, green
6 digits(0 to 999999)
Count, hold
No-voltage input/voltage input (switchable)
No-voltage input
ON impedance: 1 kΩ max. (Leakage current: 5 to 20 mA at 0 Ω)
ON residual voltage: 3 V max.
OFF impedance: 100 kΩ min.
Voltage input
High (logic) level: 4.5 to 30 VDC
Low (logic) level: 0 to 2 VDC (Input resistance: approx. 4.7 kΩ)
Minimum input signal width: 20 ms
Periodic measurement (Sampling period: 200 ms)
Input pulse of 5 Hz min.: 200 ms
(Using the averaging setting: 200 multiplied by the averaging setting (ms))
Input pulse of less than 5 Hz: Input pulse cycle
(Using the averaging setting: Two times the maximum of the input pulse cycle multiplied by the averaging
setting.)
30 Hz or 10 kHz (selectable)
30 Hz: 0.001 Hz to 30.00 Hz
10 kHz: 0.001 Hz to 10 kHz
±0.1% FS ±1 digit max. (at 23 ±5°C)
HI-LO, AREA, HI, LO
0.1 to 999.9 s
0.0 to 99.9 s
OFF/2/4/8 times
Contact output:
Minimum applied load: 10 mA at 5 VDC (failure level: P, reference value)
NEMA B300 Pilot Duty, 1/4 HP 3-A resistive load at 120 VAC, 1/3 HP 3-A resistive load at 240 VAC
SPDT
12 VDC (±10%), 100 mA Refer to Safety Precautions (Common) on page 59 for details.
Yes
0.001 to 99.999
Rightmost 3 digits
250 ms max. (Control output is turned OFF and no input is accepted during sensor waiting time.)
EEPROM (overwrites: 100,000 times min.) that can store data for 10 years min.
Operating: −10 to 55°C (−10 to 50°C if tachometers are mounted side by side) (with no icing or conden-
sation)
Storage:
25% to 85%
Black (N1.5)
−25 to 65°C (with no icing or condensation)
3 A at 250 VAC/30 VDC, resistive load (cosφ=1)
H7CX-R
44