3003R-67X-0001 Curtis Instruments Inc, 3003R-67X-0001 Datasheet - Page 4

• Manufacturer Part Number: 3003R-67X-0001
• Description: METER MAINTENANCE 2"RND 12-48VDC
• Manufacturer: Curtis Instruments Inc
• Series: enGage™ II, 3000r
• Type: Programmable Maintenance Monitor with Hour Meterr

Specifications of 3003R-67X-0001

• Shape: Circular
• Voltage Rating: 12 ~ 48V
• Display Type: LCD - 10 Segment Bar, 5 Digits
• Operating Temperature: -40°C ~ 85°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 17631703-67X-0001; 267-1033

1. Mount unit in standard SAE round cutout.
2. Connect supply voltage to pins indicated: (V+) pin
4, (V-) pin 8.
3. Connect pin 6, as appropriate for key switch, to
enable gauge display.
4. Connect pin 3 as appropriate to activate the hour
meter.
5. Connect pin 2 to a hidden enable switch.
6. Connect pin 7 to an audio, visual, horn, or other
warning device (load).
warning device is 0.5 Amps.
Installation Procedure
Caution: Max current draw on
Caution!
Bracket has been designed to remain secured to the
gauge upon proper installation. Once installed
correctly, attempts to remove bracket from gauge
may result in damage to the bracket.
Curtis enGage™ II instruments are mounted in a
52mm round cutout. Serrations on the barrel of the
gauge, combined with the mounting bracket
provided, insure fast and trouble free installation. To
insure proper installation, the 2 locking tabs on
either side of the inner diameter of the bracket
should aligned with the serrations on the barrel of
the gauge (see drawing above). Next, slide the
bracket over the barrel of the gauge and press it
firmly against back of panel. You should hear the tab
sliding over the serrations.
Curtis enGage™ II mates with an 8-pin AMP
connector (AMP pins P/N 770904-X FOR #18-24
AWG P/N 794821-1).
A preassembled mating connector kit (Curtis P/N
17631800-01) with crimp-connect terminated wires
(approx. 5 inches in length) is also available.
Maintenance
1.
2.
Function
Output and Warning LED
Due
RMB = Right Most LCD Bar
LMB = Left Most LCD Bar.
Installation
Activated
LMB
LED
KEY
Shut off
LMB
FET
4