6-5173280-1 TE Connectivity, 6-5173280-1 Datasheet - Page 6

• Manufacturer Part Number: 6-5173280-1
• Description: AMPLIMITE.050 CAP ASS'Y (V) 30P PB-FREE
• Manufacturer: TE Connectivity

Specifications of 6-5173280-1

• Product Type: Connector
• Pcb Mounting Orientation: Vertical
• Termination Method To Pc Board: Through Hole - Solder
• Pcb Mount Retention: With
• Pcb Mount Alignment: Without
• Shell Type: All Plastic
• Product Series: Series I
• Shielded: No
• Termination Post Length (mm [in]): 3.10 [0.122]
• Number Of Positions: 30
• Pcb Mount Retention Type: Mounting Holes
• Mating Retention: Without
• Centerline (mm [in]): 1.27 [0.050]
• Post Plating: Tin over Nickel
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Phosphor Bronze
• Connector Style: Plug
• Mating Alignment: Without
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not reviewed for lead free solder process
• Rohs/elv Compliance History: Always was RoHS compliant

ASHL-0005- ES REV A
Para.
4.6.5
Physical Requirements
4.6.6
4.6.7
4.6.8
4.6.9
Test Items
Temperature
Rising vs.
Current
Vibration
Sinusoidal High
Frequency
Physical Shock
Connector
Mating Force
Connector
Unmating Force
AMP Shanghai Ltd
Tyco Electronics
Requirements
30°C max. Under loaded specified
current.
No electrical discontinuity greater
than 1 microsecond (s) shall occur.
No electrical discontinuity greater
than 1 microsecond (s) shall occur.
0.78N max.
per contact
0.20N min.
per contact
Fig. 5 (to be continued)
PAGE NO
6
108-60036
Procedures
Measure temperature rising
by energized current.
Fig. 6
Subject mated connectors to
10-500-10 Hz traversed in 15
minutes with 10 G
accelerated velocity; 2 hours
each of 3 mutually
perpendicular planes.
MIL-STD-202, Method 204
Subject mated connectors to
50 G’s halfsine shock pulses
of 11 millisecond duration; 3
shocks in each direction
applied along the 3 mutually
perpendicular planes total 18
shocks;
MIL-STD-202, Method 213
Condition A
Using autograph, measure
the force required to mate
connectors by operating at
100 mm a minute. Record by
using autograph. Calculate
the value for a contact.
Using autograph, measure
the force required to unmate
connectors by operating at
100 mm a minute.
Calculate value for a contact.
Condition A
REV LOC
O
ES