6-5173280-1 TE Connectivity, 6-5173280-1 Datasheet - Page 7

• Manufacturer Part Number: 6-5173280-1
• Description: AMPLIMITE.050 CAP ASS'Y (V) 30P PB-FREE
• Manufacturer: TE Connectivity

Specifications of 6-5173280-1

• Product Type: Connector
• Pcb Mounting Orientation: Vertical
• Termination Method To Pc Board: Through Hole - Solder
• Pcb Mount Retention: With
• Pcb Mount Alignment: Without
• Shell Type: All Plastic
• Product Series: Series I
• Shielded: No
• Termination Post Length (mm [in]): 3.10 [0.122]
• Number Of Positions: 30
• Pcb Mount Retention Type: Mounting Holes
• Mating Retention: Without
• Centerline (mm [in]): 1.27 [0.050]
• Post Plating: Tin over Nickel
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Phosphor Bronze
• Connector Style: Plug
• Mating Alignment: Without
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not reviewed for lead free solder process
• Rohs/elv Compliance History: Always was RoHS compliant

ASHL-0005- ES REV A
4.6.12
4.6.13
4.6.14
4.6.15
4.6.10 Durability
4.6.11 Resistance to
Para.
(Repeated
Mate/Unmating)
Soldering Heat
Thermal Shock
Humidity-
Temperature
Cycling
Temperature
Life
Test Items
SO2 Gas
AMP Shanghai Ltd
Tyco Electronics
The requirements specified in Para.
4.6.8 and 4.6.9 shall be met after the
test.
No physical damage shall be evident
after the test.
The requirement specified in Para.
4.6.2 shall be met after the test.
The requirement specified in Para.
4.6.2 shall be met after the test.
The requirement specified in Para.
The requirement specified in Para.
4.6.2 shall be met after the test.
4.6.2 shall be met after the test.
Environmental Requirements
Requirements
Fig.5 (end)
PAGE NO
7
108-60036
Mate and unmate connectors
for 100 cycles in the same
method of testing as
Specified in Para 4.6.8,4.6.9.
Subject product mounted on
printed circuit boards to
solder bath at 260 5°C for 3
seconds
Subject mated connectors to
10 cycles of humidity-
temperature changes
between 25°C and 65°C at
95 % R.H.
MIL-STD-202, Method 106
with cold shock as -10°C
Subject mated connectors to
temperature life; 85 2°C,
250 Hours,
MIL-STD-202, Method 108
Condition B
Engage connectors, and
expose to SO2 on following
conditions.
SO2 Concentration: 10 3
ppm
Relative Humidity: 90%
min.
Temperature : Room
temperature
Time
MIL-STD-202, Method 107
between -55°C and +85°C
Subject mated/Unmated
connectors to 5 cycles
Condition A
Procedures
: 48 hours
REV LOC
O
ES