61802-1 TE Connectivity, 61802-1 Datasheet - Page 2

• Manufacturer Part Number: 61802-1
• Description: 156 SHUR PLUG 18-14 018PTPBR
• Manufacturer: TE Connectivity

Specifications of 61802-1

• Rohs Compliant: YES
• Product: Shur Plugs
• Wire Size (awg): 18-14
• Insulation: Not Insulated
• Gender: Male
• Contact Plating: Pre-Tin
• Contact Material: Brass
• Termination Style: Crimp
• Length: 12.7 mm
• Maximum Bundle Diameter: 2 mm
• Mounting Angle: Straight
• Mounting Method: Wire
• Number Of Positions / Contacts: 1
• Number Of Rows: 1
• Product Type: Contact
• Pin Size (mm [in]): 3.96 [0.156]
• Insulation Support: Non-Insulation Support
• Wire/cable Type: Regular Wire
• Finish: Pre-Tin
• Product Line: SHUR-PLUG
• Wire Range (mm [awg]): 0.80-2.00² [18-14]
• Stock Thickness (mm [in]): 0.46 [0.018]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Lead Free Status / Rohs Status: Details

3.5.
Examination of product.
Termination resistance, specified
current.
Temperature rise vs current.
Termination resistance, dry circuit.
Current cycling.
Mating force.
Unmating force.
Crimp tensile.
Durability.
Rev A
Test Requirements and Procedures Summary
Test Description
Meets requirements of product
drawing and Application
Specification 114-2042.
Temperature rise, see Figure 2.
Termination resistance, specified
current.
1.15 milliohms maximum initial.
Temperature rise vs current.
Termination resistance, specified
current.
83 N [18.6 lbf] maximum initial.
59 N [13.2 lbf] maximum after
durability.
26.6 N [6 lbf] minimum final.
9.7 N [2.2 lbf] minimum after
durability.
Mating/unmating force.
0.88 milliohms maximum
termination resistance, dry circuit.
(AWG) (amperes) max initial)
(AWG) (amperes) max initial)
Wire
Size
Wire
Size
14
16
18
14
16
18
Wire Size
(AWG)
14
16
18
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Current
Current
Requirement
Test
Test
20.7
17.4
15.0
20.7
17.5
15.0
(N [lbf] minimum)
Crimp Tensile
300 [67]
230 [52]
160 [36]
Resistance
Resistance
(milliohms
(milliohms
2.24
1.76
1.40
3.00
2.60
2.28
Visual, dimensional and functional
per applicable inspection plan.
TE Spec 109-25, calculate
resistance.
Measure potential drop of mated
contacts.
See Figure 4.
TE Spec 109-45.
Temperature rise at specified
current.
TE Spec 109-6, Condition A.
Subject mated contacts to 50
millivolt open circuit at 100
milliamperes maximum.
See Figure 4.
TE Spec 109-51, Condition C, Test
Method 2.
Subject mated contacts to 500
current cycles at 150% of specified
current for 15 minutes ON and 15
minutes OFF.
TE Spec 109-42.
Measure force necessary to
manually mate plug and receptacle
contact.
TE Spec 109-42.
Measure force necessary to
manually unmate plug and
receptacle contact.
TE Spec 109-16.
Determine crimp tensile at a rate of
1 inch per minute.
TE Spec 109-27.
Manually mate and unmate plug
and receptacle contacts for 6
cycles.
Procedure
108-2027
2 of 5