61802-1 TE Connectivity, 61802-1 Datasheet - Page 4

• Manufacturer Part Number: 61802-1
• Description: 156 SHUR PLUG 18-14 018PTPBR
• Manufacturer: TE Connectivity

Specifications of 61802-1

• Rohs Compliant: YES
• Product: Shur Plugs
• Wire Size (awg): 18-14
• Insulation: Not Insulated
• Gender: Male
• Contact Plating: Pre-Tin
• Contact Material: Brass
• Termination Style: Crimp
• Length: 12.7 mm
• Maximum Bundle Diameter: 2 mm
• Mounting Angle: Straight
• Mounting Method: Wire
• Number Of Positions / Contacts: 1
• Number Of Rows: 1
• Product Type: Contact
• Pin Size (mm [in]): 3.96 [0.156]
• Insulation Support: Non-Insulation Support
• Wire/cable Type: Regular Wire
• Finish: Pre-Tin
• Product Line: SHUR-PLUG
• Wire Range (mm [awg]): 0.80-2.00² [18-14]
• Stock Thickness (mm [in]): 0.46 [0.018]
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Lead Free Status / Rohs Status: Details

4.
4.1.
4.2.
Rev A
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
C.
Quality Conformance Inspection
The applicable quality inspection plan shall specify the sampling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with the applicable product drawing
and this specification.
NOTE
Sample Selection
Contacts shall be prepared in accordance with applicable Instruction Sheets and shall be selected
at random from current production. Each test group shall consist of 13 plug and receptacle
contacts per wire size. All contacts shall be crimped in accordance with Application Specification
114-2042.
Test Sequence
Qualification inspection shall be verified by testing samples as specified in Figure 3.
Acceptance
(1) Requirements put on test samples, as indicated in the Requirements portion of Figure 1, exist
(2) Failures attributed to equipment, test setup or operator deficiencies shall not disqualify the
(a) See paragraph 4.1.A.
(b) Numbers indicate sequence in which tests are performed.
as either the upper or lower statistical tolerance limit (95% confidence, 99% reliability). All
samples tested in accordance with this specification shall meet the stated tolerance limit.
product. When product failure occurs, corrective action shall be taken and samples
resubmitted for qualification.
Examination of product
Termination resistance, specified current
Temperature rise vs current
Termination resistance, dry circuit
Current cycling
Mating force
Unmating force
Crimp tensile
Durability
Thermal shock
Humidity/temperature cycling
Test or Examination
Figure 3
3,6
2,5
1
1
4
Test Sequence (b)
Test Group (a)
3,7
2,6
4,8
2
1
9
5
2,4
3
1
3
2,4
4
1
3
108-2027
4 of 5