747908-9 TE Connectivity, 747908-9 Datasheet - Page 2

• Manufacturer Part Number: 747908-9
• Description: D SUB CONNECTOR, STANDARD, 15POS, PLUG
• Manufacturer: TE Connectivity

Specifications of 747908-9

• Body Material: Steel
• Connector Type: D Sub
• Rohs Compliant: Yes
• Product Type: Connector
• Product Series: HD-20 (Solder Cup)
• Termination Method To Wire/cable: Solder
• Mating Connector Lock: With
• Mating Connector Lock Type: Mounting Holes
• Shell Size: 2
• Shell Type: Full Metal Shell
• Grounding Indents: With
• Grade: Standard
• Color: Black
• Shell Material: Steel
• Solder Tail Contact Plating: Tin-Copper over Nickel
• Number Of Positions: 15
• Wire Range (mm² [awg]): 0.5 - 0.6 [20]
• Shell Plating: Tin
• Insert Material: Thermoplastic
• Insert Flammability Rating: UL 94V-0
• Preloaded: Yes
• Contact Type: Pin
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold Flash
• Contact Size: 20
• Contact Configuration: Solder Cup
• Enclosure: Without
• Connector Style: Plug
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C
• Rohs/elv Compliance History: Always was RoHS compliant

3.3.
3.4.
3.5.
Rev B
Initial examination of product.
Final examination of product.
Low level contact resistance.
Insulation resistance.
Withstanding voltage.
Temperature rise vs current.
Solderability, dip test.
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per EIA-364.
Test Requirements and Procedures Summary
Test Description
Voltage: 250 volts AC
Current: 3.0 amperes for 20 AWG wire, 1.2 amperes for 28 AWG wire
Temperature:
-55 to 105°C
Meets requirements of product
drawing.
Meets visual requirements.
10 milliohms maximum.
5000 megohms minimum.
1 minute hold with no breakdown or
flashover.
0.5 milliampere maximum leakage
current.
30°C maximum temperature rise at
specified current.
Solderable area shall have a
minimum of 95% solder coverage.
MECHANICAL
Figure 1 (cont)
ELECTRICAL
Requirement
EIA-364-18.
Visual and dimensional (C of C)
inspection per product drawing.
EIA-364-18.
Visual inspection.
EIA-364-23.
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
See Figure 3.
EIA-364-21.
500 volts DC, 2 minute hold.
Test between adjacent contacts of
unmated specimens.
EIA-364-20,
Condition I.
1000 volts AC at sea level.
Test between adjacent contacts of
unmated specimens.
EIA-364-70,
Method 1.
Stabilize at a single current level
until 3 readings at 5 minute
intervals are within 1°C.
EIA-364-52,
Category 3.
Subject contacts to solderability.
Procedure
108-40031
2 of 6