747908-9 TE Connectivity, 747908-9 Datasheet - Page 5

• Manufacturer Part Number: 747908-9
• Description: D SUB CONNECTOR, STANDARD, 15POS, PLUG
• Manufacturer: TE Connectivity

Specifications of 747908-9

• Body Material: Steel
• Connector Type: D Sub
• Rohs Compliant: Yes
• Product Type: Connector
• Product Series: HD-20 (Solder Cup)
• Termination Method To Wire/cable: Solder
• Mating Connector Lock: With
• Mating Connector Lock Type: Mounting Holes
• Shell Size: 2
• Shell Type: Full Metal Shell
• Grounding Indents: With
• Grade: Standard
• Color: Black
• Shell Material: Steel
• Solder Tail Contact Plating: Tin-Copper over Nickel
• Number Of Positions: 15
• Wire Range (mm² [awg]): 0.5 - 0.6 [20]
• Shell Plating: Tin
• Insert Material: Thermoplastic
• Insert Flammability Rating: UL 94V-0
• Preloaded: Yes
• Contact Type: Pin
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold Flash
• Contact Size: 20
• Contact Configuration: Solder Cup
• Enclosure: Without
• Connector Style: Plug
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C
• Rohs/elv Compliance History: Always was RoHS compliant

4.
4.1.
4.2.
4.3.
4.4.
Rev B
QUALITY ASSURANCE PROVISIONS
Qualification Testing
A.
B.
Requalification Testing
If changes significantly affecting form, fit or function are made to the product or manufacturing
process, product assurance shall coordinate requalification testing, consisting of all or part of the
original testing sequence as determined by development/product, quality and reliability engineering.
Acceptance
Acceptance is based on verification that the product meets the requirements of Figure 1. Failures
attributed to equipment, test setup or operator deficiencies shall not disqualify the product. If product
failure occurs, corrective action shall be taken and specimens resubmitted for qualification. Testing to
confirm corrective action is required before resubmittal.
Quality Conformance Inspection
The applicable quality inspection plan shall specify the sampling acceptable quality level to be used.
Dimensional and functional requirements shall be in accordance with the applicable product drawing
and this specification.
Specimen Selection
Specimens shall be prepared in accordance with applicable Instruction Sheets and shall be
selected at random from current production. Test group 1 shall consist of 5 specimens each of 9
and 37 position with both gold flash and 30 µin gold plating, all terminated to 20 AWG wire. Test
groups 2 and 4 shall each consist of 5, 37 position specimens with gold flash, all terminated to 20
AWG wire. Test group 3 shall consist of 5, 37 position specimens with both gold flash and 30 µin
gold plating, all terminated to 20 AWG wire. Test group 5 shall consist of 1 unterminated 37
position specimen with gold flash. Test group 6 shall consist of 10, 37 position specimens with
gold flash, 5 specimens terminated to 20 AWG wire and 5 terminated to 28 AWG wire.
Test Sequence
Qualification inspection shall be verified by testing specimens as specified in Figure 2.
108-40031
5 of 6