F3SJ-A0645P30 Omron, F3SJ-A0645P30 Datasheet - Page 19

• Manufacturer Part Number: F3SJ-A0645P30
• Description: F3SJ-A Safety Light Curtain, 30mm Resolution, 645 Mm Protected Height
• Manufacturer: Omron

Item
Mutual interference
prevention function
Series connection
Test functions
Safety functions
Connection type
Protective circuits
Ambient temperature
Ambient humidity
Ambient operating light
intensity
Insulation resistance
Dielectric strength
Degree of protection
Vibration resistance
Shock resistance
Materials
Weight (packed state)
Accessories
Applicable standards
Model
Interference light prevention algorithm
Time division emission by series connection
Connectors (M12, 8-pin)
Output short-circuit protection, and power supply reverse polarity protection
Operating: 10 to 55 C (no icing), Storage: 30 to 70 C
Operating: 35% to 85% (no condensation), Storage: 35% to 95%
Incandescent lamp: 3,000 lx max. (light intensity on the receiver surface), Sunlight: 10,000 lx max. (light intensity on the receiver
surface)
20 M min. (at 500 VDC)
1,000 VAC 50/60 Hz, 1 min
IP65 (IEC60529)
Malfunction: 10 to 55 Hz, 0.7-mm double amplitude, 20 sweeps in X, Y, and Z directions
Malfunction: 100 m/s
Casing (including metal parts on both ends): Aluminum, zinc die-cast
Cap: ABS resin
Optical cover: PMMA resin (acrylic)
Cable: Oil resistant PVC
Calculate using the following equations:
For F3SJ-A@@@@P@@-TS, weight (g)=(protective height)
The values for
Protected height 245 to 590 mm:
Protected height 600 to 1,130 mm:
Protected height 1,140 to 1,655 mm:
Test rod, instruction manual, standard mounting bracket (F39-LJ1 bracket for top/bottom mounting),
mounting brackets (intermediate) (*), error mode label, User's Manual (CD-ROM)
* Number of intermediate mounting brackets depends on protective height of F3SJ.
IEC61496-1, EN61496-1 UL61496-1, Type 4 ESPE (Electro-Sensitive Protective Equipment)
IEC61496-2, prEN61496-2, UL61496-2, Type 4 AOPD (Active Opto-electronic Protective Devices)
IEC61508, EN61508 SIL3
Number of connections: up to 3 sets
Total number of beams: up to 240 beams
Maximum cable length for 2 sets: no longer than 15 m
Response time under connection: See page 20
Self test (when power is turned ON and while power is supplied)
External test (emission stop function by test input)
External device monitor
Muting (Override function included. F39-CN6 Key Cap for muting is required.)
Lockout occurs under either of the following conditions:
When more than 3 Units are connected in series.
When the total number of beams connected in series exceeds 240.
When any model other than a "-TS" model is included in a series connection.
For protective height from 600 to 1,130 mm: 1 set for each of the emitter and receiver is included
For protective height from 1,140 to 1,655 mm: 2 sets for each of the emitter and receiver are included
For protective height from 1,660 to 2,180 mm: 3 sets for each of the emitter and receiver are included
For protective height from 2,195 to 2,500 mm: 4 sets for each of the emitter and receiver are i
F3SJ-A@@@@P14-TS
are as follows:
2
, 1,000 times each in X, Y, and Z directions
= 1,100
= 1,500 protected height 2,195 to 2,500 mm:
= 2,000
protected height 1,660 to 2,180 mm:
F3SJ-A@@@@P20-TS
1.5 +
= 2,400
= 2,600
ncluded
F3SJ-A@@@@P25-TS
F3SJ Ver.2
19