353293-6 TE Connectivity, 353293-6 Datasheet - Page 5

• Manufacturer Part Number: 353293-6
• Description: WIRE-BOARD CONN, RECEPTACLE, 6POS, 1.5MM
• Manufacturer: TE Connectivity
• Series: Mini CTr

Specifications of 353293-6

• Connector Type: Wire To Board
• Contact Termination: IDC / IDT
• Gender: Receptacle
• No. Of Contacts: 6
• No. Of Rows: 1
• Pitch Spacing: 1.5mm
• Contact Plating: Tin
• Rohs Compliant: Yes
• Product Type: Connector
• Termination Method To Wire/cable: IDC
• Sealed: No
• Ul File Number: E28476
• Csa File Number: LR 7189-133
• Contact - Rated Current (a): 2
• Operating Voltage Reference: AC/DC, AC, DC
• Operating Voltage (vac): 50
• Operating Voltage (vdc): 50
• Wire/cable Size (awg): 26 – 28
• Profile Height (y-axis) (mm [in]): 6.00 [0.236]
• Number Of Positions: 6
• Number Of Rows: 1
• Centerline (mm [in]): 1.50 [0.059]
• Mating Retention: With
• Length (x-axis) (mm [in]): 10.50 [0.413]
• Width (z-axis) (mm [in]): 3.60 [0.141]
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Pre-Tin
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.2 [7.87]
• Contact Design: Dual Beam
• Mating Alignment: With
• Housing Color: Gray
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL, CSA
• Operating Temperature (°c [°f]): -30 – +105 [-22 – +221]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.80 – 0.95 [0.030 – 0.037]
• Application Use: Wire-to-Board, Wire-to-Board / Wire-to-Wire / Wire-to-Panel, Wire-to-Panel, Wire-to-Wire
• Contact Transmits (typical Application): Signal (Data)
• Pick And Place Cover: Without
• Packaging Method: Bag, Box

ASHL-0005- ES REV B
3.8.6
3.8.7
3.8.8
3.8.9
3.8.10 Panal Retention Force
3.8.11 Connector Mating
3.8.12 Durability
Para.
Tensile Strength of
wire Termination
Post Retention Force
Contact Retention
Force
Panel Mounting Force
(To be applied to post
header relay panel
mount type)
(To be applied to post
header relay panel
mount type)
/Unmating Force
(Repeated Mate /
Unmating)
Test Items
AMP Shanghai Ltd.
Tyco Electronics
9.8 N(1.0 kgf) Min.
4.9 N(0.5 kgf) Min.
49 N(5 kgf ) MAX.
83.3 N(8.5 kgf) Min.
See Fig.12
20 mΩ Max. (Final)
(AWG)
Wire
Size
26
28
Mechanical Requirements
Fig. 2 (To be continued)
Requirements
Tensile Strength of Wire
Direction
19.6(2.0)
14.7(1.5)
N(kgf)
Axial
5 of 17
Termination(min.)
PAGE
Direction
11.8(1.2)
Traverse
Document No.
N(kgf)
108-5525
Apply a pull-off load to
terminated wire of contact
secured on the tester,
Operation Speed : 50 mm/min.
The load is applied in (1) the
axial and (2) the traverse
directions as specified.
Fig.5
Measure post retention force.
Operation Speed : 50 mm/min.
Fig.6
Apply an axial pull-off load to
crimped wire.
Operation Speed : 50 mm/min.
Measure panel retention force
using panel of nominal cut-out
dimensions as specified in the
drawing.
Loading is made from the
punch entering direction of the
cut-out hole.See Fig.7
Measure panel retention force
using panel of nominal cut-out
dimensions as specified in the
drawing.
Loading is made from the
punch entering direction of the
cut-out hole.See Fig.8
Operation Speed : 50 mm/min.
Measure the force required to
mate and unmate connectors.
Operation Speed : 50 mm/min.
No. of Cycles : 30 cycles.
Procedures
REV
A
LOC
ES