BTS307E3062AT Infineon Technologies, BTS307E3062AT Datasheet - Page 12

• Manufacturer Part Number: BTS307E3062AT
• Manufacturer: Infineon Technologies

Specifications of BTS307E3062AT

• Switch Type: High Side
• Power Switch Family: BTS 307
• Input Voltage: -0.5 to 36V
• Power Switch On Resistance: 220mOhm
• Output Current: 1.4A
• Number Of Outputs: Single
• Mounting: Surface Mount
• Supply Current: 2.2mA
• Package Type: TO-220AB SMD
• Operating Temperature (min): -40C
• Operating Temperature (max): 150C
• Operating Temperature Classification: Automotive
• Pin Count: 4 +Tab
• Power Dissipation: 50W
• Lead Free Status / Rohs Status: Not Compliant

Package and Ordering Code
All dimensions in mm
Standard TO-220AB/5
TO-220AB/5, Option E3043
Semiconductor Group
BTS 307 E3043
BTS 307
C67078-S5204-A3
Ordering code
Ordering code
tbd
12
SMD TO-220AB/5, Opt. E3062
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81669 München
© Infineon Technologies AG 2001
All Rights Reserved.
Attention please!
The information herein is given to describe certain
components and shall not be considered as a guarantee of
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not
limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and
conditions and prices please contact your nearest Infineon
Technologies Office in Germany or our Infineon
Technologies Representatives worldwide (see address list).
Warnings
Due to technical requirements components may contain
dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies
Office.
Infineon Technologies Components may only be used in life-
support devices or systems with the express written approval
of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-
support device or system, or to affect the safety or
effectiveness of that device or system. Life support devices
or systems are intended to be implanted in the human body,
or to support and/or maintain and sustain and/or protect
human life. If they fail, it is reasonable to assume that the
health of the user or other persons may be endangered.
BTS 307 E3062A
T&R:
C67078-S5204-A4
Ordering code
BTS 307
2003-Oct-01