PEF80912HV1.4XT Infineon Technologies, PEF80912HV1.4XT Datasheet - Page 32

• Manufacturer Part Number: PEF80912HV1.4XT
• Manufacturer: Infineon Technologies

Specifications of PEF80912HV1.4XT

• Lead Free Status / Rohs Status: Compliant

2.3.5.4
The following signals and indications are issued on IOM
U-interface (predefined U-signals):
C/I-Indications
AI
AIL
AR
ARL
DC
DR
EI1
Signals on U-Interface
The signals SNx, TN and SP transmitted on the U-interface are defined in
•
Table 9
Signal
TN
SN0
SN1
SN2
SN3
Data Sheet
1)
Outputs of the U-Transceiver:
Activation Indication
The U-transceiver has established transparency of transmission. The downstream
device is requested to establish layer-1 functionality.
Activation Indication Loopback
The U-transceiver has established transparency of transmission. The downstream
device is requested to establish a loopback #2.
Activation Request
The downstream device is requested to start the activation procedure.
Activation Request Loop-back
The U-transceiver has detected a loop-back 2 command in the EOC-channel and has
established transparency of transmission in the direction IOM
downstream device is requested to start the activation procedure and to establish a
loopback #2.
Deactivation Confirmation
Idle code on the IOM
Deactivation Request
The U-transceiver has detected a deactivation request command from the LT-side for
a complete deactivation or a S/T only deactivation. The downstream device is
requested to start the deactivation procedure.
Error Indication 1
The U-transceiver has entered a failure condition caused by loss of framing on the
U-interface or expiry of timer T1.
U-Interface Signals
Synch. Word
(SW)
no signal
present
present
present
3
®
-2-interface.
Superframe
(ISW)
no signal
absent
absent
present
3
24
2B + D
no signal
1
1
1
3
®
-2 (C/I-indications) and on the
Functional Description
PEF 80912/80913
®
-2 to U-interface. The
M-Bits
no signal
1
1
normal
3
Table
2001-03-29
9.