BTS611L1-E3230 Infineon Technologies, BTS611L1-E3230 Datasheet - Page 15
![](/photos/31/36/313610/7pin_to-220_sml.jpg)
BTS611L1-E3230
Manufacturer Part Number
BTS611L1-E3230
Description
Manufacturer
Infineon Technologies
Datasheet
1.BTS611L1-E3230.pdf
(15 pages)
Specifications of BTS611L1-E3230
Switch Type
High Side
Power Switch Family
BTS611L1
Input Voltage
-10 to 16V
Power Switch On Resistance
160mOhm
Output Current
1.8A
Number Of Outputs
Dual
Mounting
Through Hole
Supply Current
4mA
Package Type
TO-220AB
Operating Temperature (min)
-40C
Operating Temperature (max)
150C
Operating Temperature Classification
Automotive
Pin Count
7 +Tab
Power Dissipation
36W
Lead Free Status / Rohs Status
Not Compliant
PROFET ® BTS611L1
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81669 München
© Infineon Technologies AG 2001
All Rights Reserved.
Attention please!
The information herein is given to describe certain
components and shall not be considered as a guarantee of
characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not
limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and
conditions and prices please contact your nearest Infineon
Technologies Office in Germany or our Infineon
Technologies Representatives worldwide (see address list).
Warnings
Due to technical requirements components may contain
dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies
Office.
Infineon Technologies Components may only be used in life-
support devices or systems with the express written
approval of Infineon Technologies, if a failure of such
components can reasonably be expected to cause the
failure of that life-support device or system, or to affect the
safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the
human body, or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to
assume that the health of the user or other persons may be
endangered.
Semiconductor Group
15
2003-Oct-01