TX14D12VM1CAA HITACHI, TX14D12VM1CAA Datasheet - Page 26

• Manufacturer Part Number: TX14D12VM1CAA
• Manufacturer: HITACHI

Specifications of TX14D12VM1CAA

• Lead Free Status / Rohs Status: Compliant

KAOHSIUNG HITACHI
ELECTRONICS CO.,LTD.
11. PRECAUTION IN DESIGN
11.2 PRECAUTIONS AGAINST ELECTROSTATIC DISCHARGE
11.3 HANDLING PRECAUTIONS
(2) As the adhesives used for adhering upper/lower polarizer’s and frame are made
11.1 MOUNTING PRECAUTION
(1) Since the Touch Panel on the top, and the frame on
(3) The case shall be designed not to touch the tail portion (FPC for Touch Panel).
(1) When assembling the Touch Panel on you case, please refer to the figure below.
(2) The clearance between the Touch Panel and case shall be designed so that the
(4) The boundary space between the effective area and the insulated area is unstable.
of organic substances which will be deteriorated by a chemical reaction with such
chemicals as acetone, toluene, ethanol and isopropyl alcohol. The following are
recommended for use :
normal hexane
Please contact with us when it is necessary for you to use chemicals other than
the above.
harder a pencil lead 2H.
easily damaged, they should be with full care so as not to get them touched,
pushed or rubbed by a piece on glass, tweezers and anything else which are
Touching this area may effect the operation of the Touch Panel.
The case must be designed so that it does not touch the boundary space.
As this module contains C-MOS LSIs, it is not strong against electrostatic discharge.
Make certain that the operator’s body is connected to the ground through a list
band , etc. And don’t touch I/F pins directly.
case edge never presses the input screen when it is deformed by heat or other
causes.
Touch Panel
Case
Case
Tape
Cushion
DATE Nov.12,’10
Cushion area
No.
Sh.
7B64PS 2711-TX14D12VM1CAA-5
LCM
the bottom tend to be
Case opening
Active area
PAGE 11-1/3