LM4673TM National Semiconductor, LM4673TM Datasheet - Page 6

• Manufacturer Part Number: LM4673TM
• Description: AUDIO AMP, MONO CLASS D, POWERWISE
• Manufacturer: National Semiconductor

Specifications of LM4673TM

• Operational Class: Class-D
• Audio Amplifier Output Configuration: 1-Channel Mono
• Output Power (typ): 2.65x1@4OhmW
• Audio Amplifier Function: Speaker
• Total Harmonic Distortion: 0.03@8Ohm@0.1W%
• Single Supply Voltage (typ): 3/5V
• Dual Supply Voltage (typ): Not RequiredV
• Power Supply Requirement: Single
• Rail/rail I/o Type: No
• Power Supply Rejection Ratio: 78dB
• Single Supply Voltage (min): 2.4V
• Single Supply Voltage (max): 5.5V
• Dual Supply Voltage (min): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 9
• Package Type: uSMD
• Amplifier Class: D
• No. Of Channels: 1
• Output Power: 2.65W
• Supply Voltage Range: 2.4V To 5.5V
• Thd + N: 0.03% @ 100mW, VDD=5V
• Load Impedance: 4ohm
• Operating Temperature Range: -40°C To +85°C
• Rohs Compliant: Yes
• Lead Free Status / Rohs Status: Not Compliant

www.national.com
Note 1: All voltages are measured with respect to the ground pin, unless otherwise specified.
Note 2: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
functional, but do not guarantee specific performance limits. Electrical Characteristics state DC and AC electrical specifications under particular test conditions
which guarantee specific performance limits. This assumes that the device is within the Operating Ratings. Specifications are not guaranteed for parameters
where no limit is given, however, the typical value is a good indication of device performance.
Note 3: The maximum power dissipation must be derated at elevated temperatures and is dictated by T
allowable power dissipation is P
The typical θ
Note 4: Human body model, 100pF discharged through a 1.5kΩ resistor.
Note 5: Machine Model, 220pF – 240pF discharged through all pins.
Note 6: Typical specifications are specified at 25°C and represent the parametric norm.
Note 7: Tested limits are guaranteed to National's AOQL (Average Outgoing Quality Level).
Note 8: Datasheet min/max specification limits are guaranteed by design, test, or statistical analysis.
Note 9: Shutdown current is measured in a normal room environment. Exposure to direct sunlight will increase I
should be driven as close as possible to GND for minimal shutdown current and to V
Information section under SHUTDOWN FUNCTION for more information.
Note 10: The performance graphs were taken using the Audio Precision AUX-0025 Switching Amplifier measurement Filter in series with the LC filter on the
demo board.
External Components Description
(Figure 1)
Components
1.
2.
JA
is 99.1°C/W for the micro SMD package.
C
C
S
I
Supply bypass capacitor which provides power supply filtering. Refer to the Power Supply Bypassing section
for information concerning proper placement and selection of the supply bypass capacitor.
Input AC coupling capacitor which blocks the DC voltage at the amplifier's input terminals.
DMAX
= (T
JMAX
–T
A
)/θ
JA
or the number given in Absolute Maximum Ratings, whichever is lower. For the LM4673, T
Functional Description
6
DD
for the best THD performance in PLAY mode. See the Application
JMAX
, θ
JA
, and the ambient temperature T
SD
by a maximum of 2µA. The Shutdown pin
A
. The maximum
JMAX
= 150°C.