S102S01 Sharp Electronics, S102S01 Datasheet - Page 11

• Manufacturer Part Number: S102S01
• Manufacturer: Sharp Electronics

Specifications of S102S01

• Input Type: DC
• Output Type: AC
• Input Voltage (max): 1.4V
• Output Voltage (max): 400V
• Input Current (max): 50mA
• Output Current: 8A
• Isolation Voltage: 4kV
• Package Type: SIP
• Output Device: Triac
• Pin Count: 4
• Mounting: Through Hole
• Operating Temp Range: -25C to 100C
• Operating Temperature Classification: Commercial
• Rad Hardened: No
• Lead Free Status / Rohs Status: Not Compliant

● Cleaning instructions
● Presence of ODC
Solvent cleaning :
Ultrasonic cleaning :
Recommended solvent materials :
Solvent temperature should be 45˚C or below. Immersion time should be 3minutes or less.
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol.
In case the other type of solvent materials are intended to be used, please make sure they work fine in ac-
tual using conditions since some materials may erode the packaging resin.
This product shall not contain the following materials.
And they are not used in the production process for this device.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
11
S102S01 Series
S202S01 Series
Sheet No.: D4-A02301EN