BTS6144PXK Infineon Technologies, BTS6144PXK Datasheet - Page 16

• Manufacturer Part Number: BTS6144PXK
• Manufacturer: Infineon Technologies

Specifications of BTS6144PXK

• Switch Type: High Side
• Power Switch Family: BTS6144
• Power Switch On Resistance: 9mOhm
• Output Current: 9.5A
• Number Of Outputs: 4
• Mounting: Through Hole
• Package Type: TO-220
• Operating Temperature (min): -40C
• Operating Temperature (max): 150C
• Operating Temperature Classification: Automotive
• Pin Count: 7 +Tab
• Power Dissipation: 81W
• Lead Free Status / Rohs Status: Compliant

Package and Ordering Code
All dimensions in mm
SMD:TO-220-7-180
Standard (straight): TO220-7-230
Infineon Technologies AG
C
1)
Ordering code
Ordering code
Shear and punch direction no burrs this surface.
Back side, heatsink contour
All metal surfaces tin plated, except area of cut.
0...0.15
Sales code
Sales code
6x
1.27
9.9
9.5
7.5
6.6
±0.2
±0.2
7x
0.6
A
±0.1
0.25
M
A
Q67060-S6058-A102
Q67060-S6320-A102
B
C
BTS6144B
BTS6144P
0.05
1.3
1)
B
2.4
+0.1
-0.02
4.4
0.5
16 of 16
±0.1
Published by
Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81669 München
© Infineon Technologies AG 2001
All Rights Reserved.
Attention please!
The information herein is given to describe certain
components and shall not be considered as a guarantee
of characteristics.
Terms of delivery and rights to technical change
reserved.
We hereby disclaim any and all warranties, including but
not limited to warranties of non-infringement, regarding
circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC
manufacturer.
Information
For further information on technology, delivery terms and
conditions and prices please contact your nearest
Infineon Technologies Office in Germany or our Infineon
Technologies Representatives worldwide (see address
list).
Warnings
Due to technical requirements components may contain
dangerous substances. For information on the types in
question please contact your nearest Infineon
Technologies Office.
Infineon Technologies Components may only be used in
life-support devices or systems with the express written
approval of Infineon Technologies, if a failure of such
components can reasonably be expected to cause the
failure of that life-support device or system, or to affect
the safety or effectiveness of that device or system. Life
support devices or systems are intended to be implanted
in the human body, or to support and/or maintain and
sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other
persons may be endangered.
Data sheet BTS 6144B/P
2003-Oct-01