TLE6287GPNT Infineon Technologies, TLE6287GPNT Datasheet - Page 10

• Manufacturer Part Number: TLE6287GPNT
• Manufacturer: Infineon Technologies

Specifications of TLE6287GPNT

• Lead Free Status / Rohs Status: Not Compliant

5
5.1
The EEPROM on the board has been pre-programmed with a BLDC motor control
reference demo, the microcontroller C868 will boot from the EEPROM and automatically
fetch then execute the code after power-up. The potentiometer for speed setting is
preset at zero RPM.
To run the demo, follow these steps:
• Hook up the motor wires and hall sensor signals of the brushless DC motor to the
• Connect a 12~24V battery with at least 1A output current to the board, the board is
• Turn on the knob of the potentiometer, the motor will starts to spin.
Since the reference code is designed for a demo motor, the code has to be fine tuned
for the right type of motor applied.
5.2
Users can re-program the EEPROM with their own code, to do this, follow these steps:
• Switch off the power supply by disconnecting the battery.
• Open the jumper JP3.
• Connect a RS232 cable to the host PC, and execute the Loader program on the PC.
• Connect the battery back so the board will be powered up again.
• Close the jumper JP3.
• Download your code into the EEPROM.
User’s Manual
board.
powered up then.
Get Started
Run the Demo
Re-program the EEPROM
10
Motor Control Development Kit
V 1.0, 2003-06
Get Started