EPM570GT100C5 Altera, EPM570GT100C5 Datasheet - Page 25

• Manufacturer Part Number: EPM570GT100C5
• Description: IC MAX II CPLD 570 LE 100-TQFP
• Manufacturer: Altera
• Series: MAX® IIr

Specifications of EPM570GT100C5

• Programmable Type: In System Programmable
• Delay Time Tpd(1) Max: 5.4ns
• Voltage Supply - Internal: 1.71 V ~ 1.89 V
• Number Of Logic Elements/blocks: 570
• Number Of Macrocells: 440
• Number Of I /o: 76
• Operating Temperature: 0°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 100-TQFP, 100-VQFP
• Voltage: 1.8V
• Memory Type: FLASH
• Number Of Logic Elements/cells: 570
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -
• Other names: 544-1308

Chapter 2: MAX II Architecture
Global Signals
© October 2008 Altera Corporation
Figure 2–13. Global Clock Generation
Note to
(1) Any I/O pin can use a MultiTrack interconnect to route as a logic array-generated global clock signal.
The global clock network drives to individual LAB column signals, LAB column
clocks [3..0], that span an entire LAB column from the top to the bottom of the device.
Unused global clocks or control signals in a LAB column are turned off at the LAB
column clock buffers shown in
multiplexed down to two LAB clock signals and one LAB clear signal. Other control
signal types route from the global clock network into the LAB local interconnect. See
“LAB Control Signals” on page 2–5
Figure 2–13
:
Logic Array(1)
GCLK0
GCLK1
GCLK2
GCLK3
Figure
for more information.
4
2–14. The LAB column clocks [3..0] are
4
Global Clock
Network
MAX II Device Handbook
2–17