20-101-1068 Rabbit Semiconductor, 20-101-1068 Datasheet - Page 18

• Manufacturer Part Number: 20-101-1068
• Description: MODULE RABBITCORE RCM3315
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1068

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 3000
• Clock Speed: 44.2 MHz
• Interface Type: Ethernet, Serial
• Flash: 512 KB
• Timers: 10 x 8 bit, 1 x 10 bit
• Operating Supply Voltage: 3.15 V to 3.45 V
• Board Size: 47 mm x 69 mm x 22 mm
• Core: RCM3315
• Processor Series: RCM3315
• For Use With/related Products: RCM3315
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1114

2.2.2.2 RCM3305 and RCM3315
Connect the 10-pin connector of the programming cable labeled
the RCM3305/RCM3315 as shown in Figure 3(b). There is a small dot on the circuit
board next to pin 1 of header J1. Be sure to orient the marked (usually red) edge of the
cable towards pin 1 of the connector. (Do not use the
nonprogramming serial connection.)
Connect the other end of the programming cable to a COM port on your PC.
12
NOTE: Be sure to use the serial programming cable (part number 101-0542)—the pro-
NOTE: It may be possible to use an RS-232/USB converter with the serial programming
gramming cable has blue shrink wrap around the RS-232 converter section located in the
middle of the cable. The USB programming cable and programming cables with clear or
red shrink wrap from other Rabbit kits are not designed to work with RCM3305/
RCM3315 modules.
described in this section. An RS-232/USB converter (part number 20-151-0178) is
available through the
Dynamic C.
Figure 3(b). Connect Programming Cable and Power Supply
Web
store. Note that not all RS-232/USB converters work with
DIAG
connector, which is used for a
RabbitCore RCM3305/RCM3315
PROG
to header J1 on