20-101-1138 Rabbit Semiconductor, 20-101-1138 Datasheet - Page 12

• Manufacturer Part Number: 20-101-1138
• Description: RCM4300 RABBITCORE
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1138

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Data Bus Width: 8 bit
• Core Processor: Rabbit 4000
• Clock Speed: 58.98 MHz
• Interface Type: Ethernet
• Flash: 2 MBytes
• Timers: 10 x 8 bit
• Operating Supply Voltage: 3.3 V
• Board Size: 72 mm x 47 mm x 21 mm
• For Use With/related Products: RCM4300
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1141

2.2 Hardware Connections
There are four steps to connecting the Prototyping Board for use with Dynamic C and the
sample programs:
1. Prepare the Prototyping Board for Development.
2. Attach the RCM4300 module to the Prototyping Board.
3. Connect the programming cable between the RCM4300 and the PC.
4. Connect the power supply to the Prototyping Board.
2.2.1 Step 1 — Prepare the Prototyping Board for Development
Snap in four of the plastic standoffs supplied in the bag of accessory parts from the Devel-
opment Kit in the holes at the corners as shown in Figure 2.
RabbitCore RCM4300 User’s Manual
NOTE: Pay attention to use the hole that is pointed out towards the bottom left of the
Prototyping Board since the hole below it is used for a standoff when mounting the
RCM4300 on the Prototyping Board.
Figure 2. Insert Standoffs
12