20-101-1138 Rabbit Semiconductor, 20-101-1138 Datasheet - Page 75

• Manufacturer Part Number: 20-101-1138
• Description: RCM4300 RABBITCORE
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1138

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Data Bus Width: 8 bit
• Core Processor: Rabbit 4000
• Clock Speed: 58.98 MHz
• Interface Type: Ethernet
• Flash: 2 MBytes
• Timers: 10 x 8 bit
• Operating Supply Voltage: 3.3 V
• Board Size: 72 mm x 47 mm x 21 mm
• For Use With/related Products: RCM4300
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1141

1. Connect the AC adapter and the serial programming cable as shown in Chapter 2, “Get-
2. Ethernet Connections
•
•
•
•
3. Apply Power
RabbitCore RCM4300 User’s Manual
ting Started.”
There are four options for connecting the RCM4300 module to a network for develop-
ment and runtime purposes. The first two options permit total freedom of action in
selecting network addresses and use of the “network,” as no action can interfere with
other users. We recommend one of these options for initial development.
No LAN —
module’s Ethernet port directly to the PC’s network interface card using an RJ-45
crossover cable. A crossover cable is a special cable that flips some connections
between the two connectors and permits direct connection of two client systems. A
standard RJ-45 network cable will not work for this purpose.
Micro-LAN —
Ethernet 10Base-T hub and connect both the PC’s network interface card and the
RCM4300 module’s Ethernet port to it using standard network cables.
The following options require more care in address selection and testing actions, as
conflicts with other users, servers and systems can occur:
LAN —
one to which the development PC is already connected. You will need to obtain IP
addressing information from your network administrator.
WAN —
Area Networks, but exceptional care should be used with IP address settings and all
network-related programming and development. We recommend that development and
debugging be done on a local network before connecting a RabbitCore system to the
Internet.
The PC running Dynamic C does not need to be the PC with the Ethernet card.
Plug in the AC adapter. The RCM4300 module and Prototyping Board are now ready to
be used.
TIP: Checking and debugging the initial setup on a micro-LAN is recommended before
connecting the system to a LAN or WAN.
Connect the RCM4300 module’s Ethernet port to an existing LAN, preferably
The RCM4300 is capable of direct connection to the Internet and other Wide
The simplest alternative for desktop development. Connect the RCM4300
Another simple alternative for desktop development. Use a small
75