20-101-0673 Rabbit Semiconductor, 20-101-0673 Datasheet - Page 76

• Manufacturer Part Number: 20-101-0673
• Description: MODULE RABBITCORE RCM3610
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0673

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 3000
• Clock Speed: 22.1 MHz
• Interface Type: Serial
• Flash: 256 KB
• Timers: 10 x 8 bit, 1 x 10 bit
• Operating Supply Voltage: 3 V to 3.6 V
• Board Size: 31 mm x 54 mm x 16 mm
• Core: RCM3610
• Processor Series: RCM3600
• For Use With/related Products: RCM3610
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1103

•
•
•
70
RS-232
serial port are available on the Prototyping Board at header J2. A jumper on header JP2
is used to select the drivers for Serial Port E, which can be set either as a 3-wire RS-232
serial port or as an RS-485 serial port. Serial Ports C and D are not available while the
IrDA transceiver is in use.
A 10-pin 0.1-inch spacing header strip is installed at J2 allows you to connect a ribbon
cable that leads to a standard DE9 serial connector.
RS-485
header J1. A 3-pin shrouded header is installed at J1. A jumper on header JP2 enables
the RS-485 output for Serial Port E.
IrDA
handling link distances up to 1.5 m. The IrDA uses Serial Port F—Serial Ports C and D
are unavailable while Serial Port F is in use.
—An infrared transceiver is included on the Prototyping Board, and is capable of
—Three 3-wire serial ports or one 5-wire RS-232 serial port and one 3-wire
—One RS-485 serial port is available on the Prototyping Board at shrouded
RabbitCore RCM3600