101-0526 Rabbit Semiconductor, 101-0526 Datasheet - Page 101

• Manufacturer Part Number: 101-0526
• Description: COMPUTER SNGLBD LP3510 FOX7.4MHZ
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0526

• Module/board Type: Single Board Computer Module
• For Use With/related Products: LP3510
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

3. Fasten the unit with the four 4-40 screws and washers included with the LCD/keypad
User’s Manual
module. If your panel is thick, use a 4-40 screw that is approximately 3/16" (5 mm)
longer than the thickness of the panel.
Carefully tighten the screws until the gasket is compressed and the plastic bezel face-
plate is touching the panel.
Do not tighten each screw fully before moving on to the next screw. Apply only one or
two turns to each screw in sequence until all are tightened manually as far as they can
be so that the gasket is compressed and the plastic bezel faceplate is touching the panel.
Figure C-8. LCD/Keypad Module Mounted in Panel (rear view)
95