101-0599 Rabbit Semiconductor, 101-0599 Datasheet - Page 70

• Manufacturer Part Number: 101-0599
• Description: COMPUTER SNGLBD BL2500 512K FLSH
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0599

• Module/board Type: Single Board Computer Module
• For Use With/related Products: BL2500
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5.2.4 Running More Demo Programs With a Direct Connection
The sample programs discussed in this section use the Demonstration Board from the
BL2500/OEM2500 Development Kit to illustrate their operation. Appendix C, “Demon-
stration Board Connections,” contains diagrams of typical connections between the Coy-
ote and the Demonstration Board used to run these sample programs.
The program SMPTP.C ( SAMPLES\BL2500\TCPIP\ ) uses the SMTP library to send an
e-mail when a switch on the Demonstration Board is pressed.
The program BROWSELED.C ( SAMPLES\BL2500\TCPIP\ ) demonstrates a basic con-
troller running a Web page. Two “LEDs” are created on the Web page, and two buttons on
the Demonstration Board then toggle them. Users can change the status of the lights from
the Web browser. The LEDs on the Demonstration Board match the ones on the Web page.
As long as you have not modified the
macro in the sample program, enter
TCPCONFIG 1
the following server address in your Web browser to bring up the Web page served by the
sample program.
http://10.10.6.100
Otherwise use the TCP/IP settings you entered in the
library.
TCP_CONFIG.LIB
The program PINGLED.C ( SAMPLES\BL2500\TCPIP\ ) demonstrates ICMP by ping-
ing a remote host. It will flash LEDs DS1 and DS2 on the Demonstration Board when a
ping is sent and received.
5.3 Where Do I Go From Here?
NOTE: If you purchased your Coyote through a distributor or Rabbit partner, contact the
distributor or partner first for technical support.
If there are any problems at this point:
• Use the Dynamic C
Help
menu to get further assistance with Dynamic C.
• Check the Rabbit Technical Bulletin Board and forums at
www.rabbit.com/support/bb/
and at www.rabbit.com/forums/.
• Use the Technical Support e-mail form at www.rabbit.com/support/questionSubmit.shtml.
If the sample programs ran fine, you are now ready to go on.
If the sample programs ran fine, you are now ready to go on.
Additional sample programs are described in the Dynamic C TCP/IP User’s Manual.
Refer to the Dynamic C TCP/IP User’s Manual to develop your own applications. An
Introduction to TCP/IP provides background information on TCP/IP, and is available on
the
Web
site.
Coyote (BL2500)
64