SB72EX-100CR NetBurner Inc, SB72EX-100CR Datasheet - Page 18

• Manufacturer Part Number: SB72EX-100CR
• Description: DUAL PORT SERIAL-ETHERNET
• Manufacturer: NetBurner Inc

Specifications of SB72EX-100CR

• Module/board Type: Ethernet Board
• For Use With/related Products: SB72
• For Use With: 528-1000 - KIT DEV SERIAL-ETHERNET FOR SB72
• Other names: Q2999326

SB72EX User's Manual, 350030-001
5. Run Telnet by typing: “telnet 10.1.1.79 24” after the prompt, and press the Enter key. Note: This
6. At this point, anything you type in the Telnet window should appear in the serial terminal window
assumes a port number of 24. You must replace this port number with the listening port number
that you assigned in the “Device Connection Settings (TCP mode)” section. Remember to
substitute your IP Address for our example IP Address (i.e.10.1.1.79).
and vice versa.
•
•
•
Click the MTTTY Connect button.
Remove and reapply power to your SB72 EX.
The SB72EX factory application will boot.
o
o
Data Bits are the number of bits in a transmitted data package.
The Stop bit follows the data and parity bits in serial communication. It
indicates the end of transmission.
Page 18