101-0517 Rabbit Semiconductor, 101-0517 Datasheet - Page 13

• Manufacturer Part Number: 101-0517
• Description: MODULE RABBITCORE RCM3100
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0517

• Rohs Status: RoHS non-compliant
• Module/board Type: MPU Core Module
• For Use With/related Products: RCM3100
• Other names: 316-1021

2.2.2 Connect Programming Cable
The programming cable connects the RCM3100 module to the PC running Dynamic C to
download programs and to monitor the module for debugging.
Connect the 10-pin connector of the programming cable labeled
the RCM3100 module as shown in Figure 2. Be sure to orient the marked (usually red)
edge of the cable towards pin 1 of the connector. (Do not use the
used for a normal serial connection.)
Connect the other end of the programming cable to a COM port on your PC.
User’s Manual
NOTE: Be sure to use the programming cable (part number 101-0513) supplied with this
NOTE: Some PCs now come equipped only with a USB port. It may be possible to use
Development Kit—the programming cable has red shrink wrap around the RS-232 con-
verter section located in the middle of the cable. Programming cables with blue or clear
shrink wrap from other from other Rabbit Semiconductor kits are not designed to work
with RCM3100 modules.
an RS-232/USB converter (Part No. 540-0070) with the programming cables men-
tioned above. Note that not all RS-232/USB converters work with Dynamic C.
Figure 2. Connect Programming Cable to RCM3100
DIAG
PROG
connector, which is
to header J3 on
7