101-0517 Rabbit Semiconductor, 101-0517 Datasheet - Page 14

• Manufacturer Part Number: 101-0517
• Description: MODULE RABBITCORE RCM3100
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0517

• Rohs Status: RoHS non-compliant
• Module/board Type: MPU Core Module
• For Use With/related Products: RCM3100
• Other names: 316-1021

2.2.3 Connect Power
When all other connections have been made, you can connect power to the Prototyping
Board.
Connect the wall transformer to jack J11 on the Prototyping Board as shown in Figure 3
below.
Figure 3. Power Supply Connections
Plug in the wall transformer. The power LED on the Prototyping Board should light up.
The RCM3100 and the Prototyping Board are now ready to be used.
NOTE: A RESET button is provided on the Prototyping Board to allow hardware reset
without disconnecting power.
To power down the Prototyping Board, unplug the power connector from J11. You should
disconnect power before making any circuit adjustments in the prototyping area, changing
any connections to the board, or removing the RCM3100 from the Prototyping Board.
2.2.3.1 Overseas Development Kits
Development kits sold outside North America include a header connector that may be
connected to 3-pin header J9 on the Prototyping Board. The connector may be attached
either way as long as it is not offset to one side. The red and black wires from the connec-
tor can then be connected to the positive and negative connections on your power supply.
The power supply should deliver 8 V–24 V DC at 8 W.
8
RabbitCore RCM3100