MPC870CZT133 Freescale Semiconductor, MPC870CZT133 Datasheet - Page 80

• Manufacturer Part Number: MPC870CZT133
• Description: IC MPU POWERQUICC 133MHZ 256PBGA
• Manufacturer: Freescale Semiconductor

Specifications of MPC870CZT133

• Processor Type: MPC8xx PowerQUICC 32-Bit
• Speed: 133MHz
• Voltage: 3.3V
• Mounting Type: Surface Mount
• Package / Case: 256-PBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -

Document Revision History
17 Document Revision History
Table 37
80
Revision
Number
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
2.0
0
lists significant changes between revisions of this hardware specification.
10/2003
12/2003
2/2003
3/2003
5/2003
5/2003
5/2003
5/2003
5/2003
6/2003
8/2003
8/2003
9/2003
Date
Initial release.
Took out the time-slot assigner and changed the SCC for SCC3 to SCC4.
Changed the package drawing, removed all references to Data Parity. Changed the SPI Master Timing
Specs. 162 and 164. Added the RMII and USB timing. Added the 80-MHz timing.
Made sure the pin types were correct. Changed the Features list to agree with the MPC885.
Corrected the signals that had overlines on them. Made corrections on two pins that were typos.
Changed the pin descriptions for PD8 and PD9.
Changed a few typos. Put back the I
Changed the pin descriptions per the June 22 spec, removed Utopia from the pin descriptions,
changed PADIR, PBDIR, PCDIR and PDDIR to be 0 in the Mandatory Reset Config.
Added the reference to USB 2.0 to the Features list and removed 1.1 from USB on the block diagrams.
Changed the USB description to full-/low-speed compatible.
Added the DSP information in the Features list.
Put a new sentence under Mechanical Dimensions.
Fixed table formatting.
Nontechnical edits.
Released to the external web.
Added TDMb to the MPC875 Features list, the MPC875 Block Diagram, added 13.5 Serial Interface
AC Electrical Specifications, and removed TDMa from the pin descriptions.
Changed DBGC in the Mandatory Reset Configuration to X1.
Changed the maximum operating frequency to 133 MHz.
Put the timing in the 80 MHz column.
Put in the orderable part numbers.
Rounded the timings to hundredths in the 80 MHz column.
Put the pin numbers in footnotes by the maximum currents in Table 6.
Changed 22 and 41 in the Timing.
Put TBD in the Thermal table.
MPC875/MPC870 PowerQUICC™ Hardware Specifications, Rev. 4
Table 37. Document Revision History
2
C. Put in the new reset configuration, corrected the USB timing.
Changes
Freescale Semiconductor