TDA8034AT/C1,112 NXP Semiconductors, TDA8034AT/C1,112 Datasheet - Page 22
![no-image](/images/manufacturer_photos/0/4/487/nxp_semiconductors_sml.jpg)
TDA8034AT/C1,112
Manufacturer Part Number
TDA8034AT/C1,112
Description
IC SMART CARD INTERFACE 16SOIC
Manufacturer
NXP Semiconductors
Datasheet
1.TDA8034TC1118.pdf
(29 pages)
Specifications of TDA8034AT/C1,112
Controller Type
Smart Card Interface
Interface
Analog
Voltage - Supply
3V, 5V
Current - Supply
65mA
Operating Temperature
-25°C ~ 85°C
Mounting Type
Surface Mount
Package / Case
16-SOIC (3.9mm Width)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
NXP Semiconductors
TDA8034T_TDA8034AT
Product data sheet
14.4 Reflow soldering
Key characteristics in reflow soldering are:
Table 10.
Table 11.
Moisture sensitivity precautions, as indicated on the packing, must be respected at all
times.
Studies have shown that small packages reach higher temperatures during reflow
soldering, see
Package thickness (mm)
< 2.5
≥ 2.5
Package thickness (mm)
< 1.6
1.6 to 2.5
> 2.5
•
•
•
Lead-free versus SnPb soldering; note that a lead-free reflow process usually leads to
higher minimum peak temperatures (see
reducing the process window
Solder paste printing issues including smearing, release, and adjusting the process
window for a mix of large and small components on one board
Reflow temperature profile; this profile includes preheat, reflow (in which the board is
heated to the peak temperature) and cooling down. It is imperative that the peak
temperature is high enough for the solder to make reliable solder joints (a solder paste
characteristic). In addition, the peak temperature must be low enough that the
packages and/or boards are not damaged. The peak temperature of the package
depends on package thickness and volume and is classified in accordance with
Table 10
SnPb eutectic process (from J-STD-020C)
Lead-free process (from J-STD-020C)
and
Figure
All information provided in this document is subject to legal disclaimers.
11
Rev. 3.0. — 17 January 2011
16.
Package reflow temperature (°C)
Volume (mm
< 350
235
220
Package reflow temperature (°C)
Volume (mm
< 350
260
260
250
3
3
TDA8034T; TDA8034AT
)
)
Figure
350 to 2000
260
250
245
16) than a SnPb process, thus
≥ 350
220
220
Smart card interface
245
> 2000
260
245
© NXP B.V. 2011. All rights reserved.
22 of 29