DS2482S-800+T&R Maxim Integrated Products, DS2482S-800+T&R Datasheet - Page 5

• Manufacturer Part Number: DS2482S-800+T&R
• Description: IC MASTER I2C-1WIRE 8CH 16-SOIC
• Manufacturer: Maxim Integrated Products

Specifications of DS2482S-800+T&R

• Controller Type: I²C Bus Controller
• Interface: I²C
• Voltage - Supply: 3.3 V, 5V
• Current - Supply: 750µA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 16-SOIC (3.9mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Figure 1. Block Diagram
DETAILED DESCRIPTION
The DS2482-800 is a self-timed 8-channel 1-Wire master, which supports advanced 1-Wire waveform features
including standard and Overdrive speeds, active pullup, and strong pullup for power delivery. Once supplied with
command and data, the I/O controller of the DS2482 performs time-critical 1-Wire communication functions such as
reset/presence detect cycle, read-byte, write-byte, single-bit R/W and triplet for ROM Search, without requiring
interaction with the host processor. The host obtains feedback (completion of a 1-Wire function, presence pulse, 1-
Wire short, search direction taken) through the Status Register and data through the Read Data register. The
DS2482 communicates with a host processor through its I²C bus interface in standard-mode or in fast-mode. The
logic state of three address pins (2 address pins with the 1-channel version) determines the I²C slave address of
the DS2482, allowing up to 8 devices operating on the same bus segment without requiring a hub.
DEVICE REGISTERS
The DS2482 has four registers that the I²C host can read: Channel Selection, Configuration, Status, and Read
Data. These registers are addressed by a read pointer. The position of the read pointer, i.e., the register that the
host will read in a subsequent read access, is defined by the instruction that the has DS2482 executed last. The
host has read and write access to the Channel Selection and Configuration Registers to select one of several 1-
Wire channels and to enable certain 1-Wire features.
SDA
AD0
SCL
AD1
AD2
Controller
Interface
Register
Config
T-Time OSC
I²C
Read Data
Controller
Register
Register
Status
I/O
5 of 23
Channel
Select
XCVR
XCVR
XCVR
XCVR
XCVR
XCVR
XCVR
XCVR
Line
Line
Line
Line
Line
Line
Line
Line
IO0
IO4
IO6
IO7
IO1
IO2
IO3
IO5