AD9852ASTZ Analog Devices Inc, AD9852ASTZ Datasheet - Page 25

• Manufacturer Part Number: AD9852ASTZ
• Description: IC DDS SYNTHESIZER CMOS 80-LQFP
• Manufacturer: Analog Devices Inc

Specifications of AD9852ASTZ

• Resolution (bits): 12 b
• Master Fclk: 200MHz
• Tuning Word Width (bits): 48 b
• Voltage - Supply: 3.14 V ~ 3.47 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 80-LQFP
• Pll Type: Frequency Synthesis
• Frequency: 100MHz
• Supply Current: 660mA
• Supply Voltage Range: 3.135V To 3.465V
• Digital Ic Case Style: LQFP
• No. Of Pins: 80
• Operating Temperature Range: -40°C To +85°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AD9852/PCBZ - BOARD EVAL FOR AD9852
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

The 32-bit automatic I/O update counter can be used to
construct complex chirp or ramped FSK sequences. Because
this internal counter is synchronized with the AD9852 system
clock, it allows precisely timed program changes to be invoked.
For such changes, the user need only reprogram the desired
registers before the automatic I/O update clock is generated.
In chirp mode, the destination frequency is not directly speci-
fied. If the user fails to control the chirp, the DDS automatically
confines itself to the frequency range between dc and Nyquist.
Unless terminated by the user, the chirp continues until power
is removed.
RAMP RATE
RAMP RATE
I/O UD CLK
I/O UD CLK
CLR ACC2
MODE
MODE
HOLD
DPW
TW1
DFW
TW1
FREQUENCY
FREQUENCY
000 (DEFAULT)
000 (DEFAULT)
F1
F1
0
0
0
0
Figure 43. Effect of CLR ACC2 in FM Chirp Mode
Figure 44. Example of Hold Function
Rev. E | Page 25 of 52
DELTA FREQUENCY WORD
RAMP RATE
011 (CHIRP)
When the chirp destination frequency is reached, the user can
choose any of the following actions:
•
•
•
011 (CHIRP)
F1
Stop at the destination frequency either by using the
HOLD pin or by loading all 0s into the delta frequency
word registers of the frequency accumulator (ACC1).
Use the HOLD pin function to stop the chirp, and then ramp
down the output amplitude either by using the digital multi-
plier stages and the output shaped keying pin (Pin 30) or by
using the program register control (Address 21 hex to
Address 24 hex).
Abruptly end the transmission with the CLR ACC2 bit.
AD9852