ES-UA-5A BANNER ENGINEERING, ES-UA-5A Datasheet - Page 15

• Manufacturer Part Number: ES-UA-5A
• Description: Sensor, E-stop Module, output 6A,
• Manufacturer: BANNER ENGINEERING
• Type: Safetyr

Specifications of ES-UA-5A

• Contact Form: 4-NO/1-NC
• Dimensions: 45mmW×84mmH×118mmD
• Enclosure Rating: IP20
• Ip Rating: IP20
• Mounting Type: DIN Rail
• Number Of Outputs: 8
• Output Type: Relay
• Power, Rating: 4 W
• Primary Type: Controller
• Standards: UL, CSA, CE
• Voltage, Supply: 115/12 to 24 VAC/VDC
• Coil Voltage Vdc Nom: 24V
• Coil Resistance: 250ohm
• Contact Current Max: 6A
• Contact Voltage Ac Nom: 24V
• Contact Voltage Dc Nom: 250V
• Contact Configuration: SPST-NC
• No. Of Poles: 1
• Relay Mounting: DIN Rail
• Lead Free Status / Rohs Status: RoHS Exempt Product
• For Use With: Emergency Stop

ES-UA-5A and ES-VA-5A E-Stop Safety Modules
P/N 122365 rev. C
Category
Input Requirements
OFF-State Recovery Time
Indicators
Construction
Mounting
Vibration Resistance
Operating Conditions
Design Standards
Certifications
Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Specification
E-stop switch: must have normally closed contacts each capable of switching 20
to 50 mA @ 12 to 30V dc; and must be open > 15 ms for a valid stop command.
Maximum input resistance 250 ohms per channel @ 24V dc supply voltage.
Maximum input resistance 25 ohms per channel @ 12V dc supply voltage.
Reset switch: must have one normally open contact capable of switching 20 to 50
mA @ 12 to 30V dc.
350 ms max.
3 green LED indicators: Power ON , Channel 1, Channel 2
1 red LED indicator: indicates a fault condition (see Troubleshooting)
Polycarbonate housing. Rated NEMA 1, IEC IP20
Mounts to standard 35 mm DIN rail track. Safety Module must be installed inside an
enclosure rated NEMA 3 (IEC IP54), or better.
10 to 60 Hz @ 0.35 mm peak displacement per UL 991
60 to 150 Hz @ 5 g max.
Temperature: 0° to +50°C (+32° to 122°F), (surrounding air)
Max. Relative Humidity: 90% @ +50°C (non-condensing)
Cat. 4 PL e per EN ISO 13849-1; SIL 3 per IEC 61508 and IEC 62061
Tel: [phone]
Emergency
Stop
Devices
29YL
15