EL-USB-2-LCD Lascar Electronics, EL-USB-2-LCD Datasheet - Page 3

• Manufacturer Part Number: EL-USB-2-LCD
• Description: Data Logger; Temperature/Humidity; with LCD display; USB Interface
• Manufacturer: Lascar Electronics

Specifications of EL-USB-2-LCD

• Accuracy: ±3.0 %RH
• Humidity: 0-100 %RH
• Sample Rate: Every 10 Second to Every 12 Hours
• Temperature Accuracy: ±0.5 (±1.0) °C (°F)
• Temperature, Range, Measuring: –35 (–31) to 80 (176) °C (°F)
• Lead Free Status / Rohs Status: RoHS Compliant part

EL-USB-2-LCD
LCD status indicators:
*If the logger is set to ‘LCD off’ or ‘LCD on for 30 seconds’ mode, then this will only be shown after the button
is pressed. Otherwise the display will remain blank.
The number of flashes and colours indicate:
Specifications liable to change without prior warning
Display
(Single LED, Single Flash)
(Single LED, Double flash)
(Single LED, Triple flash)
(Single LED, Single Flash)
(Single LED, Double flash)
(Single LED, Triple flash)
Delayed Start
Push to Start
Logging
Stopped
Logger status
www.lascarelectronics.com
Humidity, Temperature and Dew Point Data Logger with LCD Display
This is shown when the logger is set to start at a specific date and
time*
This is shown when the logger is setup for ‘push to start’ logging
This is shown when the logger is running in ‘LCD off’ mode, and the
button is pressed. The display clears again after three seconds
If the logger has not been set to log and the button is pressed, three
dashes are displayed for three seconds
The channel is logging, no alarm
Delayed start
Logger full, no alarm
The channel is logging, low alarm
The channel is logging, high alarm
Logger full, alarm
EL-USB-2-LCD
Issue 1c
Explanation
06/2008
N.J-H
Applies to EL-USB-2-LCD
Page 3 of 5