328996 TE Connectivity, 328996 Datasheet - Page 13

• Manufacturer Part Number: 328996
• Description: TERMINAL, PIDG R 16-14
• Manufacturer: TE Connectivity
• Type: One-Holer

Specifications of 328996

• Angle: Straight
• Brand/series: PIDG
• Color: Blue
• Contact Plating: Tin
• Diameter, Insulation: 0.17 "
• Insulation Type: Nylon
• Length, Overall: 0.703 "
• Material, Contact: Copper
• Primary Type: Ring
• Size, Stud: 4
• Termination: Wire
• Width, Overall: 0.25 "
• Wire Size: 16-14 AWG
• Terminal Shape: Ring Tongue
• Receptacle Style: Straight
• Body Style: PIDG
• Barrel Type: Closed Barrel
• Wire/cable Type: Regular Wire
• Insulation: Yes
• Insulation Support: Insulation Support
• Insulation Diameter (mm [in]): 4.32 [.170] Max.
• Stud Diameter (mm [in]): 2.84 [0.112]
• Stud Size: 4
• Shape: RING-041
• Heavy Duty: No
• Finish: Tin
• Insulation Material: Nylon
• Voltage (vac): 300
• Wire/cable Size (cma): 2,050 – 5,180
• Wire Range (mm [awg]): 1.25-2.00² [16-14]
• Tongue Material Thickness (mm [in]): 0.84 [0.033]
• Government/industry Qualification: No
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: Loose Piece
• Lead Free Status / Rohs Status: RoHS Compliant part

6. VISUAL AID
Figure 11 shows a typical application of PIDG terminals, splices, and end caps. This illustration should be used
by production personnel to ensure a correctly applied terminal, splice, or end cap. Applications which DO NOT
appear correct should be inspected using the information in the preceding pages of this specification and in the
instructional material shipped with the product or tooling.
IF APPLICABLE, DOT CODE MUST BE
WELL FORMED AND CORRESPOND
WITH WIRE SIZE MARKING ON TOOLING
Rev
D
TERMINAL, SPLICE, OR END CAP
MUST BE STRAIGHT AND NOT
TWISTED ALONG AXIS
WIRE INSULATION MUST BE INSIDE
METAL SLEEVE OF TERMINAL,
SPLICE, OR END CAP
CRIMP MUST BE EVENLY
FORMED ACROSS CENTER
OF WIRE BARREL
FIGURE 11. VISUAL AID (CONT’D)
PIDG Terminals, Splices, and End Caps
INSULATION OF TERMINAL, SPLICE, OR END CAP
MUST BE FORMED OVER WIRE INSULATION
EACH WIRE MUST BE FLUSH
TO END OF WIRE BARREL
OR BOTTOMED ON STOP
INSULATION OF TERMINAL, SPLICE, OR END CAP
MUST BE EVENLY FORMED WITHOUT
OVERSTRESS MARKS
FRONT BELLMOUTH
MUST BE EVIDENT
WIRE MUST BE VISIBLE
AT END OF WIRE BARREL
INSULATION OF TERMINAL, SPLICE, OR
END CAP MUST NOT BE CUT OR TORN
WIRE MUST BE BOTTOMED
IN END CAP
END OF TERMINAL, SPLICE, OR
END CAP MUST NOT
BE BENT OR DEFORMED
114-2157
13
of 14